Home>Products>Large Slewing Bearings>162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings
162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 162.40.2128.891.41.1503 Bearing SPECIFICATIONS
Browse 162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings Categories in the BEARING-MALAYSIA SDN.BHD. Manufacturers Shield & Seal Accessories Online Free. 250.0000 mm D including Large Slewing Bearings.
- Standard 5
162.40.2128.891.41.1503
- 250.0000 mm
- Shield & Seal
- 1900 rpm
- 203000 N
- 95.000 mm
- 3300 rpm
- 55.00 mm
- 173000 N
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 250.0000 mm
- Shield & Seal
- 1900 rpm
- 203000 N
- 95.000 mm
- 3300 rpm
- 55.00 mm
- 173000 N
- 2700 rpm
- 3.00 mm
Standard 5 162.40.2128.891.41.1503 162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
11.35.2220.001.41.1503 | Standard 5 | - | - | - | 61.9 mm | - | - | 76.759 mm | - |
121.50.6000.990.41.1502 | Standard 5 | 52.0000 mm | - | - | - | 20.000 mm | - | 15.00 mm | - |
192.32.3150.990.41.1502 | Standard 5 | 170.0000 mm | - | - | - | 95.000 mm | - | 64.00 mm | - |
162.50.2800.891.41.1503 | Standard 5 | - | - | - | - | 40 mm | M 39x3 | 28 mm | - |
11.30.2235.000.11.1503 | Standard 5 | 215.0000 mm | - | - | - | 100.000 mm | - | 47.00 mm | - |
192.32.3550.990.41.1502 | Standard 5 | 180.0000 mm | - | - | - | 100.000 mm | - | 34.00 mm | - |
24 0411 01 | Rollix | 110.0000 mm | - | - | - | 60.000 mm | - | 38.10 mm | - |
27 0541 01 | Rollix | - | 287.337 mm | - | - | - | - | - | - |
2 0308 01 | Rollix | - | - | - | - | 45 mm | - | - | - |
1 0422 01 | Rollix | 111.125 mm | - | - | 52.375 mm | - | - | 64.643 mm | - |
11.35.1750.700.11.1503 | Standard 5 | 62 mm | - | - | - | 35 mm | - | 20 mm | 55.52 mm |
91.35.2012.990.11.1502 | Standard 5 | 62.0000 mm | - | - | - | 25.000 mm | - | 17.00 mm | - |
91.35.1802.990.11.1502 | Standard 5 | 440.0000 mm | - | - | - | 210.000 mm | - | 168.00 mm | - |
161.36.2000.890.11.1503 | Standard 5 | - | 112 mm | - | - | 19.05 mm | - | 31 mm | - |
161.40.2128.891.41.1503 | Standard 5 | - | 473.075 mm | - | - | - | - | - | - |
191.50.4500.990.41.1502 | Standard 5 | 130.0000 mm | - | - | - | 50.000 mm | - | 31.00 mm | - |
8 0307 | Rollix | 520.0000 mm | - | - | - | 380.000 mm | - | 65.00 mm | - |
12.40.2622.400.11.1502 | Standard 5 | - | 107.95 mm | - | - | - | - | 73.025 mm | - |
91.50.2446.990.41.1502 | Standard 5 | 140.0000 mm | - | - | - | 65.000 mm | - | 58.70 mm | - |
162.36.1900.890.11.1503 | Standard 5 | 100 mm | 39 mm | - | - | 45 mm | - | - | - |
91.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:270000 N; D:190.0000 mm; Oil Speed Rating n2:8800 rpm; d:105.000 mm; Grease Speed Rating n1:5900 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:305000 N; B:72.00 mm; Fillet Radius rb:1.00 mm; |
11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings | d:1000 mm; B:100 mm; Limiting speed:200 r/min; E:1165 mm; D1 ≈:1148 mm; ra max.:5 mm; Basic dynamic load rating C:2920 kN; d1 ≈:1073 mm; Calculation factor e:0.2; Calculation factor Y:0.6; da min.:1023 mm; Da max.:1197 mm; r1,2 min.:6 mm; Fatigue load limit Pu:455 kN; D:1220 mm; das:1063 mm; Db max.:1197 mm; Mass bearing:230 kg; Reference speed:160 r/min; s max.:12 mm; |
91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:773 kN; D:250 mm; 2B:84 mm; Limiting speed:2600 r/min; r3,4 min.:3 mm; Calculation factor Y1:1.6; b:10 mm; Reference speed:1500 r/min; da max.:164 mm; rc max.:1 mm; d:140 mm; Calculation factor Y2:2.3; Calculation factor Y0:1.6; Basic static load rating C0:1140 kN; Mass bearing pair:17.9 kg; Fatigue load limit Pu:116 kN; K:7.5 mm; T:91.5 mm; Da min.:219 mm; Ca min.:8 mm; |
2 0245 Rollix Slewing Ring Bearings | d:50.000 mm; Basic Dynamic Radial Load Rating C:48800 N; B:30.20 mm; Basic Static Radial Load Rating Co:39000 N; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6300 rpm; D:90.0000 mm; Grease Speed Rating n1:4800 rpm; Sealed Speed Rating n3:4800 rpm; |
192.32.2240.990.41.1502 Standard 5 Slewing Ring Bearings | Specific static load factor K0:300 N/mm²; Lubricant:Regular relubricatio; rb max.:1 mm; Specific dynamic load factor K:100 N/mm²; r2 min.:1 mm; b:9 mm; b1:8 mm; ra max.:0.6 mm; Basic dynamic load rating C:500 kN; Mass plain bearing:3.1 kg; Da min.:104.8 mm; α:6 °; Da max.:115 mm; Sealing solution:Triple-lip seals; Basic static load rating C0:1500 kN; d:76.2 mm; C:57.15 mm; r1 min.:0.6 mm; |
121.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Dimension L:4.3750 in; Dimension G:0.3750 in; Shaft Diameter D:1 3/16 in; Dimension N:0.7813 in; Width A:1.6250 in; Dimension J:1.6250 in; Dimension B:4.1250 in; Dimension H:1.1563 in; Dimension D2:2.7500 in; Basic Dynamic Radial Load Rating:4380 lbf; Pin Dia A1:0.5313 in; Dimension S1:0.8750 in; Weight W:1.40 lb; Insert Bearing IB:ZMaRC; Dimension C:3.5000 in; Basic Static Radial Load Rating Co:2520 lbf; |
91.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | P150°:236 kN; Eye bolt:2 x 1/2-13 UNC; End plug (suffix Y):X-5217-2; L:831.85 mm; Initial grease fill:2749.95 g; Mass pillow block:351 kg; Cap bolt recommended tightening torque:4284.4 N·m; P120°:260 kN; H1:241.3 mm; PG:1/4 NPT; P180°:285 kN; Da:399.999 mm; Housing:SSAFS 052 KA; H2:95.25 mm; PosiTrac Plus contact element:2 x B10724-178; Stabilizing ring:2 x A8898; h:69.85 mm; Cap bolt:1 1/2-6 UNC; |
38 0411 01 Rollix Slewing Ring Bearings | Appropriate attachment bolt size G:1.5 in; R1:163.512 mm; Eye bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:4284.4 N·m; L:869.95 mm; J max.:749.3 mm; Stabilizing ring:SR-0-40; RG:1 NPT; H2:101.6 mm; Housing:SAFS 640; P180°:267 kN; H1:250.825 mm; A1:228.6 mm; Labyrinth ring:2 x LOR 666; Bearing limiting speed:1500 r/min; R2:50.8 mm; ba:103.188 mm; P150°:222 kN; Cap bolt:4 x 1 1/2-6 UNC; |
23 0411 01 Rollix Slewing Ring Bearings | G:Tr 710x7; h:30 mm; b:55 mm; Mass lock nut:186 kg; B:106 mm; d1:825 mm; d2:772 mm; Associated eyebolt for handling:M 16; d3:900 mm; B5:133 mm; Associated spanner:TMFN 600-750; |
121.45.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Minimum axial load factor A:130; Reference speed:110 r/min; d1:1050 mm; Fatigue load limit Pu:2280 kN; Mass bearing:515 kg; D:1060 mm; H:205 mm; Basic dynamic load rating C:7350 kN; D1:810 mm; Limiting speed:220 r/min; d:800 mm; B:60 mm; r1,2 min.:7.5 mm; Basic static load rating C0:40500 kN; Da max.:845 mm; ra max.:6 mm; da min.:1015 mm; |
61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings | Ca:85.801 mm; da:120 mm; R1:79.375 mm; Bearing limiting speed:2800 r/min; RG:1/2 NPT; A1:120.65 mm; Labyrinth ring (db shaft position):LOR 127; Pa:27.4 kN; J1:69.85 mm; Cap bolt:1-8 UNC; End plug (suffix Y):EPR 15; P60°:185 kN; J min.:336.55 mm; H1:133.35 mm; Stabilizing ring:SR-24-20; L:419.1 mm; h:46.831 mm; H:257.175 mm; H2:53.975 mm; R2:30.163 mm; |
12.30.1995.001.41.1503 Standard 5 Slewing Ring Bearings | Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; B1:5 mm; Coefficient of friction µ max.:0.1; B:30 mm; d:30 mm; D1:50 mm; Mass bushing:0.13 kg; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; Tolerance housing:H7; D:40 mm; |
162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 162.40.2128.891.41.1503 INTERCHANGE
Large Slewing Bearings Part series 162.40.2128.891.41.1503 is a potential replacement for these common bearing part numbers:
162.40.2128.891.41.1503
162.40.2128.891.41.1503
162.40.2128.891.41.1503
162.40.2128.891.41.1503
162.40.2128.891.41.1503
162.40.2128.891.41.1503
162.40.2128.891.41.1503
162.40.2128.891.41.1503
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 162.40.2128.891.41.1503 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing