Home>Products>Large Slewing Bearings>11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings
11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 11.30.2235.001.41.1503 Bearing SPECIFICATIONS
The online 11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings 1000 mm d parts store gives you immediate access to a selection 100 mm B of more 200 r/min Limiting speed than 1.4 million new, used, remanufactured. BEARING-MALAYSIA SDN.BHD.
- Standard 5
11.30.2235.001.41.1503
- 1000 mm
- 100 mm
- 200 r/min
- 1165 mm
- 1148 mm
- 5 mm
- 2920 kN
- 1073 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 1000 mm
- 100 mm
- 200 r/min
- 1165 mm
- 1148 mm
- 5 mm
- 2920 kN
- 1073 mm
- 0.2
- 0.6
- 1023 mm
- 1197 mm
- 6 mm
- 455 kN
- 1220 mm
- 1063 mm
- 1197 mm
- 230 kg
- 160 r/min
- 12 mm
Standard 5 11.30.2235.001.41.1503 11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
161.40.2240.890.11.1503 | Standard 5 | - | - | - | - | 50 mm | - | - | - |
27 0411 01 | Rollix | 314.325 mm | - | - | - | 220.662 mm | - | 239.712 mm | - |
61.50.2355.001.49.1504 | Standard 5 | 787.4 mm | - | - | - | 609.6 mm | - | 171.45 mm | - |
11.40.2795.001.41.1502 | Standard 5 | - | 138 mm | - | - | - | - | - | - |
191.50.5000.990.41.1502 | Standard 5 | 3.8750 in | - | - | - | 2.500 in | - | 0.6875 in | - |
92.35.1802.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.45.2654.890.11.1503 | Standard 5 | - | 165.894 mm | - | - | - | - | 92.075 mm | - |
11.35.2220.000.11.1503 | Standard 5 | 720 mm | - | - | - | 440 mm | - | 226 mm | - |
191.20.1800.990.41.1502 | Standard 5 | - | - | 31.75 mm | - | - | - | - | - |
12.30.2538.000.11.1503 | Standard 5 | 270 mm | - | - | - | - | M 170x3 | 109 mm | - |
12.45.2940.000.19.1502 | Standard 5 | - | - | - | - | - | - | - | - |
23 0541 01 | Rollix | - | 169.863 mm | - | - | - | - | - | - |
37 0411 01 | Rollix | - | 156 mm | - | - | - | - | - | - |
161.36.1900.890.11.1503 | Standard 5 | 80 mm | - | - | - | 25 mm | - | 21 mm | - |
192.40.4500.990.41.1502 | Standard 5 | 175.0000 mm | - | - | - | 110.000 mm | - | 60.00 mm | - |
3 0217 | Rollix | - | - | - | - | - | M 180x3 | 120 mm | - |
161.50.2500.891.41.1503 | Standard 5 | 40.0000 mm | - | - | - | 17.000 mm | - | 12.00 mm | - |
191.25.2800.990.41.1502 | Standard 5 | - | - | 210 mm | - | 60 mm | M 52x3 | 44 mm | - |
61.50.1900.001.49.1504 | Standard 5 | - | 257.175 mm | 46.831 mm | - | - | - | - | - |
91.35.1802.991.41.1502 | Standard 5 | 620 mm | - | - | - | 500 mm | - | 72 mm | - |
91.35.1900.990.11.1502 | Standard 5 | 12 mm | - | - | - | 6 mm | - | 3 mm | - |
162.45.2366.891.41.1503 | Standard 5 | 35 mm | - | - | - | 15 mm | - | 15.9 mm | - |
12.35.2500.000.11.1503 | Standard 5 | 260.0000 mm | - | - | - | 170.000 mm | - | 42.00 mm | - |
26 0541 01 | Rollix | - | 1.5 mm | - | - | - | - | 100 mm | - |
62.50.1800.001.49.1504 | Standard 5 | 260 mm | - | - | 80 mm | - | - | - | - |
161.45.2366.891.41.1503 | Standard 5 | - | - | - | - | - | - | 49.2 mm | - |
92.35.2012.991.41.1502 | Standard 5 | - | - | 42.862 mm | - | - | - | - | - |
191.25.2500.990.41.1502 Standard 5 Slewing Ring Bearings | d:152.4 mm; Da min.:197.5 mm; Specific static load factor K0:300 N/mm²; b1:11 mm; Mass plain bearing:17.5 kg; Da max.:213.5 mm; Basic dynamic load rating C:2600 kN; r1 min.:1 mm; D:222.25 mm; dk:207.162 mm; Basic static load rating C0:5200 kN; Design (sliding contact surface combination):Steel/steel; C:104.775 mm; M:8 mm; Material constant KM:330; B:120.65 mm; Lubricant:Maintenance free &nd; α:5 °; |
12.35.2690.000.11.1503 Standard 5 Slewing Ring Bearings | B:6 mm; d:5 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; D:10 mm; D1:12 mm; Tolerance shaft:e7; B1:2 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.003 kg; Coefficient of friction µ min.:0.08; |
161.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings | Thread grub screw G2:5/16-24 UNF; N:14 mm; Hexagonal key size for grub screw N:3.969 mm; L:130 mm; B:49.2 mm; A3:3.2 mm; Fatigue load limit Pu:0.8 kN; Recommended tightening torque for grub screw:6.5 N·m; J6:118 mm; Basic dynamic load rating C:30.7 kN; Recommended diameter for attachment bolts, mm G:12 mm; SWN:7 mm; Basic static load rating C0:19 kN; A1:14 mm; R1:25.5 mm; J7:34 mm; Housing material:Cast iron; |
121.45.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:5730 lbf; Thread Diameter G:1/2-13; Weight W:1.60 lb; Distance J:3.2500 in; Shaft Diameter D:1 7/16 in; Dimension H1:1.8750 in; Dimension S1:1.0000 in; Dimension L:4.5000 in; Width A:1.7500 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension F:0.7500 in; Height H:3.8750 in; |
191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:205000 N; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:232000 N; B:49.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; d:105.000 mm; D:225.0000 mm; Oil Speed Rating Open/Shielded n2:2900 rpm; |
192.32.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.5 in; d:31.75 mm; B4:6.75 mm; A3:3.2 mm; Mass bearing unit:1.35 kg; s1:32.3 mm; Basic static load rating C0:15.3 kN; J7:15 mm; R1:22 mm; Basic dynamic load rating C:25.5 kN; B1:51.1 mm; Thread grub screw G2:3/8-24 UNF; Db1:88 mm; H:156 mm; Hexagonal key size for grub screw N:4.763 mm; J:130 mm; Rα:45 °; Da:88.9 mm; |
8 04 Rollix Slewing Ring Bearings | L:539.75 mm; J1:95.25 mm; Labyrinth ring:2 x LOR 114; P60°:230 kN; P180°:96.1 kN; Da:259.999 mm; R2:39.688 mm; Pa:30.9 kN; h:60.325 mm; J max.:463.55 mm; Stabilizing ring:SR-0-24; H1:160.325 mm; R1:95.25 mm; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; Housing:SAF 624; P120°:87.2 kN; A2:215.9 mm; A1:158.75 mm; Cap bolt recommended tightening torque:203.4 N·m; |
192.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Max. speed for Taconite seal:440 r/min; N1:34.925 mm; Mass pillow block:172 kg; Taconite seal:TER 154; Housing:SAW 538; End plug (suffix Y):EPR 21; da:174.625 mm; H1:200.025 mm; P180°:113 kN; Ca:129.819 mm; Appropriate attachment bolt size G:1.25 in; Eye bolt:2 x 3/8-16 UNC; J min.:549.275 mm; ba:92.869 mm; L:711.2 mm; P120°:107 kN; P60°:290 kN; Pa:68.5 kN; R1:120.65 mm; P150°:94.3 kN; |
3 026 Rollix Slewing Ring Bearings | B:180 mm; Coefficient of friction µ max.:0.08; Effective load carrying cross section A:33820 mm²; Mass bushing:2.11 kg; Specific static load factor K0:200 N/mm²; Coefficient of friction µ min.:0.03; Specific dynamic load factor K:140 N/mm²; d:190 mm; Tolerance housing:H7; Tolerance shaft:h8; Permissible sliding velocity v max.:0.5 m/s; D:210 mm; Permissible sliding velocity v min.:0 m/s; |
11.50.3167.001.49.1502 Standard 5 Slewing Ring Bearings | Limiting speed:6000 r/min; da max.:45.6 mm; Mass bearing:0.45 kg; ra max.:1.5 mm; da min.:44 mm; B:21 mm; Calculation factor f0:13.1; Fatigue load limit Pu:0.815 kN; d:35 mm; D2 ≈:70.2 mm; D:80 mm; Basic dynamic load rating C:35.1 kN; Basic static load rating C0:19 kN; r1,2 min.:1.5 mm; Calculation factor kr:0.03; d2 ≈:45.92 mm; Da max.:71 mm; |
12.45.2940.001.49.1502 Standard 5 Slewing Ring Bearings | G:M 200x3; Da max.:306 mm; B1:125 mm; K:7.5 mm; Mass bearing + sleeve:38.5 kg; G1:20 mm; d2 ≈:220 mm; da min.:198 mm; Calculation factor Y2:3.3; Fatigue load limit Pu:183 kN; D:320 mm; B:104 mm; r1,2 min.:3 mm; B2 ≈:131 mm; Basic dynamic load rating C:1456 kN; b:13.9 mm; Limiting speed:2000 r/min; Calculation factor e:0.31; Reference speed:1500 r/min; ra max.:2.5 mm; |
162.28.1700.891.21.1503 Standard 5 Slewing Ring Bearings | K:9 mm; D1 ≈:266 mm; da max.:188 mm; Da max.:303 mm; ra max.:3 mm; B:108 mm; Mass bearing + sleeve:47.4 kg; Calculation factor e:0.35; Calculation factor Y1:1.9; D:320 mm; d3:195 mm; Reference speed:1600 r/min; d2 ≈:188 mm; B1:139 mm; Calculation factor Y0:1.8; Basic dynamic load rating C:1539 kN; Limiting speed:2000 r/min; Ba min.:8 mm; d1:135 mm; r1,2 min.:4 mm; |
11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 11.30.2235.001.41.1503 INTERCHANGE
Large Slewing Bearings Part series 11.30.2235.001.41.1503 is a potential replacement for these common bearing part numbers:
11.30.2235.001.41.1503
11.30.2235.001.41.1503
11.30.2235.001.41.1503
11.30.2235.001.41.1503
11.30.2235.001.41.1503
11.30.2235.001.41.1503
11.30.2235.001.41.1503
11.30.2235.001.41.1503
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 11.30.2235.001.41.1503 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing