Home>Products>Large Slewing Bearings>61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings
61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 61.50.1900.001.49.1504 Bearing SPECIFICATIONS
High Quality 61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings. Competitive Large Slewing Bearings Pricing. Accept BEARING-MALAYSIA SDN.BHD. Small Order. Easy 85.801 mm Ca and Fast Shipping.
- Standard 5
61.50.1900.001.49.1504
- 85.801 mm
- 120 mm
- 79.375 mm
- 2800 r/min
- 1/2 NPT
- 120.65 mm
- LOR 127
- 27.4 kN
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 85.801 mm
- 120 mm
- 79.375 mm
- 2800 r/min
- 1/2 NPT
- 120.65 mm
- LOR 127
- 27.4 kN
- 69.85 mm
- 1-8 UNC
- EPR 15
- 185 kN
- 336.55 mm
- 133.35 mm
- SR-24-20
- 419.1 mm
- 46.831 mm
- 257.175 mm
- 53.975 mm
- 30.163 mm
Standard 5 61.50.1900.001.49.1504 61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
12.40.3300.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.28.1700.891.21.1503 | Standard 5 | 320 mm | - | - | - | - | - | 108 mm | - |
92.35.1900.990.11.1502 | Standard 5 | 270.0000 mm | - | - | - | 150.000 mm | - | 90.00 mm | - |
191.25.2500.990.41.1502 | Standard 5 | 222.25 mm | - | - | 104.775 mm | 152.4 mm | - | 120.65 mm | - |
11.40.2619.000.11.1502 | Standard 5 | 37.0000 mm | - | - | - | 20.000 mm | - | 18.00 mm | - |
121.36.4250.990.41.1502 | Standard 5 | 12 mm | - | - | - | 7 mm | - | 8 mm | - |
7 0380 01 | Rollix | 125 mm | - | - | - | 80 mm | - | - | - |
91.50.2644.990.41.1502 | Standard 5 | 110.0000 mm | - | - | - | 60.000 mm | - | 28.00 mm | - |
91.40.2199.990.11.1502 | Standard 5 | 250 mm | - | - | - | 140 mm | - | - | - |
192.25.2000.990.41.1502 | Standard 5 | 150.0000 mm | - | - | - | 70.000 mm | - | 35.00 mm | - |
91.50.2266.990.41.1502 | Standard 5 | 280.0000 mm | - | - | - | 180.000 mm | - | 46.00 mm | - |
31 0411 01 | Rollix | 40.0000 mm | - | - | - | 17.000 mm | - | 17.5 mm | - |
11.50.3167.001.49.1502 | Standard 5 | 80 mm | - | - | - | 35 mm | - | 21 mm | - |
11.35.2220.001.41.1503 | Standard 5 | - | - | - | 61.9 mm | - | - | 76.759 mm | - |
162.40.2368.890.11.1503 | Standard 5 | - | 360.363 mm | - | - | - | - | - | - |
191.40.3150.990.41.1502 | Standard 5 | 34 mm | 20 mm | - | - | 10 mm | - | - | - |
161.40.2368.890.11.1503 | Standard 5 | 480.0000 mm | - | - | - | 320.000 mm | - | 74.00 mm | - |
62.50.1800.001.49.1504 | Standard 5 | 260 mm | - | - | 80 mm | - | - | - | - |
121.45.6000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
92.50.2644.990.41.1502 | Standard 5 | 200.0000 mm | - | - | - | 95.000 mm | - | 77.80 mm | - |
192.25.2240.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
11.40.2915.000.11.1502 | Standard 5 | - | - | 40.481 mm | - | - | - | - | - |
91.50.2842.990.41.1502 | Standard 5 | - | - | - | - | 7 mm | - | 12 mm | - |
11.40.2915.001.41.1502 | Standard 5 | 250.0000 mm | - | - | - | 95.000 mm | - | 55.00 mm | - |
12.30.2330.001.41.1503 | Standard 5 | 52.0000 mm | - | - | - | 20.000 mm | - | 15.00 mm | - |
11.40.2240.001.41.1502 | Standard 5 | 62.0000 mm | - | - | - | 30.000 mm | - | 32.00 mm | - |
61.50.2645.001.49.1504 | Standard 5 | 120.0000 mm | - | - | - | 55.000 mm | - | 49.20 mm | - |
121.50.5600.990.41.1502 | Standard 5 | 47 mm | - | - | - | - | - | 12 mm | - |
192.25.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.36.1900.891.41.1503 | Standard 5 | - | 138 mm | - | - | - | - | - | - |
192.20.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Tolerance shaft:h8; Coefficient of friction µ max.:0.1; D:30 mm; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Coefficient of friction µ min.:0.05; d:25 mm; B:25 mm; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.036 kg; |
11.30.2031.600.11.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:23000 rpm; B:7.00 mm; D:22.0000 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:3250 N; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N; Oil Speed Rating Open/Shielded n2:43000 rpm; d:8.000 mm; Accessories:One Seal; |
161.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | Weight:0.53 kg; D:80 mm; ra:1.5 max; Dynamic (Cr):36.000 kN; da:34 min; Bearing designation:6405 ; B:21 mm; d:25 mm; Static (Cor):19.200 kN; Da:70 max; rs:1.5 mm; Grease:9 400 min-1; Pu:0.873 kN; Oil:11 000 min-1; |
1 0422 01 Rollix Slewing Ring Bearings | B:64.643 mm; C:52.375 mm; Design (sliding contact surface combination):Steel/steel; D:111.125 mm; Sealing solution:Double-lip seals; Lubricant:Regular relubricatio; M:6.5 mm; da max.:76.7 mm; Mass plain bearing:2.85 kg; b:9 mm; Specific static load factor K0:300 N/mm²; b1:8 mm; Material constant KM:330; Basic static load rating C0:1270 kN; α:8 °; rb max.:1 mm; Basic dynamic load rating C:425 kN; |
191.25.1800.990.41.1502 Standard 5 Slewing Ring Bearings | ra max.:0.6 mm; rb max.:1 mm; Da max.:143.1 mm; Da min.:131.4 mm; C:71.425 mm; r1 min.:0.6 mm; B:83.337 mm; b:10.5 mm; da min.:101.2 mm; Mass plain bearing:5.8 kg; r2 min.:1 mm; Sealing solution:Triple-lip seals; da max.:108.6 mm; Basic dynamic load rating C:780 kN; M:6.5 mm; α:6 °; dk:136.906 mm; Specific static load factor K0:300 N/mm²; Design (sliding contact surface combination):Steel/steel, heavy-d; |
35 0541 01 Rollix Slewing Ring Bearings | d:3.200 mm; Fillet Radius ra:0.30 mm; Shielded or Sealed B1:4.4 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:312 N; Basic Static Radial Load Rating Co:120 N; Width Plain B:4.4 mm; Grease Speed Rating Open/Shielded n1:75000 rpm; D:12.7000 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Sealed Speed Rating n3:52000 rpm; |
121.45.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:5730 lbf; Thread Diameter G:1/2-13; Weight W:1.60 lb; Distance J:3.2500 in; Shaft Diameter D:1 7/16 in; Dimension H1:1.8750 in; Dimension S1:1.0000 in; Dimension L:4.5000 in; Width A:1.7500 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension F:0.7500 in; Height H:3.8750 in; |
11.40.2240.001.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.00 mm; Oil Speed Rating n2:10000 rpm; B:32.00 mm; d:30.000 mm; D:62.0000 mm; Grease Speed Rating n1:7500 rpm; Basic Static Radial Load Rating Co:25500 N; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:34500 N; |
192.50.6735.990.41.1502 Standard 5 Slewing Ring Bearings | d:35 mm; B:17 mm; Grease:0.230 kN; with tapered bore:1207 ; B1:mm; rs Dynamic (Cr):1.1 mm; D:72 mm; Static (Cor):16.270 kN; with cylindrical bore:11 000 min-1; Oil:9 400 min-1; Pu:5.110 kN; |
91.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:39000 N; D:175.0000 mm; B:18.00 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:46500 N; d:140.000 mm; Sealed Speed Rating n3:2000 rpm; |
121.36.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:19000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N; Sealed Speed Rating n3:14000 rpm; B:12.00 mm; Grease Speed Rating Open/Shielded n1:19000 rpm; Oil Speed Rating n2:24000 rpm; d:12.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Oil Speed Rating Open/Shielded n2:24000 rpm; Accessories:Snap-Ring; |
12.40.2950.001.41.1502 Standard 5 Slewing Ring Bearings | Calculation factor Y0:0.76; Calculation factor X:0.41; Calculation factor Y2:1.41; Calculation factor Y1:0.92; d1 ≈:42.48 mm; Mass bearing:0.2 kg; ra max.:1 mm; Calculation factor A:0.00155; Calculation factor kr:0.095; Db max.:57.8 mm; Fatigue load limit Pu:0.735 kN; d:30 mm; Limiting speed:20000 r/min; da min.:35.6 mm; D:62 mm; Reference speed:15000 r/min; rb max.:0.6 mm; a:18 mm; |
61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings Video
Standard 5 61.50.1900.001.49.1504 INTERCHANGE
Large Slewing Bearings Part series 61.50.1900.001.49.1504 is a potential replacement for these common bearing part numbers:
61.50.1900.001.49.1504
61.50.1900.001.49.1504
61.50.1900.001.49.1504
61.50.1900.001.49.1504
61.50.1900.001.49.1504
61.50.1900.001.49.1504
61.50.1900.001.49.1504
61.50.1900.001.49.1504
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 61.50.1900.001.49.1504 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing