Home>Products>Large Slewing Bearings>192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings
192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 192.40.3150.990.41.1502 Bearing SPECIFICATIONS
170 Million used 192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings instantly 149.1 N·m Cap bolt recommended tightening torque searchable. Shop our large selection of parts based on brand, price, description, and location. Order the Large Slewing Bearings with 82.55 mm da stock ... BEARING-MALAYSIA SDN.BHD.
- Standard 5
192.40.3150.990.41.1502
- 82.55 mm
- 149.1 N·m
- EPR 11
- 206.375 mm
- 84.5 kN
- 1/2-13 UNC
- 1/8 NPT
- 41.275 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 82.55 mm
- 149.1 N·m
- EPR 11
- 206.375 mm
- 84.5 kN
- 1/2-13 UNC
- 1/8 NPT
- 41.275 mm
- 349.25 mm
- 950 r/min
- SR-18-15
- 196.85 mm
- 58.7 kN
- 31.3 kg
- SSAFS 518
- 48 kN
- 101.6 mm
- 160 mm
- 3/8 NPT
- 4.763 mm
Standard 5 192.40.3150.990.41.1502 192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
91.50.2266.990.41.1502 | Standard 5 | 280.0000 mm | - | - | - | 180.000 mm | - | 46.00 mm | - |
162.40.2240.890.11.1503 | Standard 5 | 120.0000 mm | - | - | - | 65.000 mm | - | 23.00 mm | - |
121.32.3550.990.41.1502 | Standard 5 | 69.012 mm | - | - | 15.875 mm | 33.338 mm | - | 19.583 mm | - |
121.36.4500.990.41.1502 | Standard 5 | - | 157.559 mm | 28.575 mm | - | - | - | - | - |
11.30.1734.001.41.1503 | Standard 5 | 40.0000 mm | - | - | - | 17.000 mm | - | 12.00 mm | - |
12.30.1800.000.11.1503 | Standard 5 | - | - | - | - | 440 mm | Tr 440x5 | 60 mm | - |
191.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
12.30.1995.000.11.1503 | Standard 5 | 70 mm | - | - | - | 65 mm | - | 55 mm | - |
161.40.2000.891.41.1503 | Standard 5 | - | - | - | - | 25 mm | - | - | - |
162.45.2510.891.41.1503 | Standard 5 | - | 125.412 mm | 30.956 mm | - | - | - | - | - |
161.45.2366.891.41.1503 | Standard 5 | - | - | - | - | - | - | 49.2 mm | - |
32 0541 01 | Rollix | 170.0000 mm | - | - | - | 80.000 mm | - | 39.00 mm | - |
161.36.1700.890.11.1503 | Standard 5 | 95 mm | - | - | - | 45 mm | - | - | - |
192.32.3150.990.41.1502 | Standard 5 | 170.0000 mm | - | - | - | 95.000 mm | - | 64.00 mm | - |
121.40.4750.990.41.1502 | Standard 5 | 14 mm | - | - | - | 12 mm | - | 10 mm | - |
161.28.1700.891.21.1503 | Standard 5 | 660 mm | - | 25.4 mm | - | 480 mm | - | 150 mm | - |
121.45.6000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.36.1800.890.11.1503 | Standard 5 | - | 71 mm | - | - | - | - | 34.1 mm | - |
192.50.3550.990.41.1502 | Standard 5 | 720 mm | - | - | - | 440 mm | - | 226 mm | - |
162.40.2240.891.41.1503 | Standard 5 | 72.0000 mm | - | - | - | 35.000 mm | - | 27.00 mm | - |
92.40.2199.990.11.1502 | Standard 5 | - | - | - | - | 30.163 mm | M16 | 38.1 mm | - |
121.50.5600.990.41.1502 | Standard 5 | 47 mm | - | - | - | - | - | 12 mm | - |
39 0411 01 | Rollix | 200 mm | - | - | 79 mm | 140 mm | - | 80 mm | - |
61.50.2130.001.49.1504 | Standard 5 | - | - | - | - | 220 mm | 219.151 mm | 32.004 mm | - |
92.35.1900.991.41.1502 | Standard 5 | 75 mm | - | - | - | 65 mm | - | 50 mm | - |
61.50.2355.001.49.1504 | Standard 5 | 787.4 mm | - | - | - | 609.6 mm | - | 171.45 mm | - |
12.40.2950.000.11.1502 | Standard 5 | - | - | 54.769 mm | - | - | - | - | - |
36 0411 01 | Rollix | 150.0000 mm | - | - | - | 70.000 mm | - | 35.00 mm | - |
191.40.2800.990.41.1502 | Standard 5 | 16 mm | - | - | - | 8 mm | - | 4 mm | - |
91.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings | D:110.0000 mm; B:28.00 mm; Basic Static Radial Load Rating Co:12200 N; d:60.000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3800 rpm; Basic Dynamic Radial Load Rating C:31200 N; |
11.35.1750.700.11.1503 Standard 5 Slewing Ring Bearings | s max.:2 mm; D:62 mm; D1 ≈:51 mm; Da max.:57 mm; das:42.8 mm; Reference speed:5300 r/min; Basic dynamic load rating C:48.4 kN; E:55.52 mm; Calculation factor kr:0.3; Limiting speed:6700 r/min; Mass bearing:0.26 kg; d:35 mm; r3,4 min.:0.3 mm; da min.:40 mm; Fatigue load limit Pu:6.55 kN; Calculation factor Y:0.4; r1,2 min.:1 mm; B:20 mm; Basic static load rating C0:56 kN; Db max.:58 mm; |
8 0405 05 Rollix Slewing Ring Bearings | r3,4 min.:0.3 mm; d:20 mm; Calculation factor f2B:1.03; Calculation factor f2C:1.05; Preload class C GC:235 N; Preload class B GB:120 N; Static axial stiffness, preload class C:44 N/µm; Calculation factor f0:7.2; Calculation factor f1:1; Calculation factor f:1.04; d1:26.6 mm; D:42 mm; Calculation factor f2A:1; Static axial stiffness, preload class B:32 N/µm; B:12 mm; da max.:26.2 mm; Attainable speed for grease lubrication:54000 r/min; |
121.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Mass bearing:0.35 kg; Reference speed:8000 r/min; da max.:43 mm; Calculation factor Y:1.6; T:19.845 mm; Dimension series:14000; ra max.:0.8 mm; D:69.012 mm; Da max.:62 mm; r3,4 min.:1.3 mm; Calculation factor Y0:0.9; d:33.338 mm; r1,2 min.:0.8 mm; B:19.583 mm; Basic static load rating C0:67 kN; Db min.:63 mm; Limiting speed:10000 r/min; C:15.875 mm; rb max.:1.3 mm; Da min.:57 mm; |
161.40.2368.891.41.1503 Standard 5 Slewing Ring Bearings | rb max.:1 mm; B:22.225 mm; d:25.4 mm; Material constant KM:330; α:6 °; b1:3 mm; Sealing solution:Triple-lip seals; Specific static load factor K0:300 N/mm²; dk:36.5 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.3 mm; C:19.05 mm; da max.:29 mm; Lubricant:Regular relubricatio; b:3.2 mm; Basic static load rating C0:166 kN; r2 min.:1 mm; ra max.:0.3 mm; Design (sliding contact surface combination):Steel/steel; |
161.36.1800.890.11.1503 Standard 5 Slewing Ring Bearings | r1,2 min.:2 mm; Calculation factor Y0:3.2; K:4.5 mm; ra max.:2 mm; B:52 mm; Basic dynamic load rating C:452 kN; Da max.:191 mm; D1 ≈:186 mm; Calculation factor Y2:4.8; Basic static load rating C0:610 kN; Limiting speed:800 r/min; d2 ≈:145 mm; B1:80 mm; B2:28 mm; Calculation factor e:0.21; db min.:137 mm; b:8.3 mm; Fatigue load limit Pu:62 kN; Calculation factor Y1:3.2; Mass bearing + sleeve:8.7 kg; |
11.35.2620.000.11.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:2800 rpm; Basic Dynamic Radial Load Rating C:20800 N; d:105.000 mm; B:13.00 mm; Fillet Radius ra:1.00 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; Basic Static Radial Load Rating Co:23600 N; D:130.0000 mm; |
11.50.3167.001.49.1502 Standard 5 Slewing Ring Bearings | Limiting speed:6000 r/min; da max.:45.6 mm; Mass bearing:0.45 kg; ra max.:1.5 mm; da min.:44 mm; B:21 mm; Calculation factor f0:13.1; Fatigue load limit Pu:0.815 kN; d:35 mm; D2 ≈:70.2 mm; D:80 mm; Basic dynamic load rating C:35.1 kN; Basic static load rating C0:19 kN; r1,2 min.:1.5 mm; Calculation factor kr:0.03; d2 ≈:45.92 mm; Da max.:71 mm; |
11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings | d:1000 mm; B:100 mm; Limiting speed:200 r/min; E:1165 mm; D1 ≈:1148 mm; ra max.:5 mm; Basic dynamic load rating C:2920 kN; d1 ≈:1073 mm; Calculation factor e:0.2; Calculation factor Y:0.6; da min.:1023 mm; Da max.:1197 mm; r1,2 min.:6 mm; Fatigue load limit Pu:455 kN; D:1220 mm; das:1063 mm; Db max.:1197 mm; Mass bearing:230 kg; Reference speed:160 r/min; s max.:12 mm; |
92.40.2395.990.11.1502 Standard 5 Slewing Ring Bearings | Calculation factor kr:0.12; da min.:448 mm; r3,4 min.:2.1 mm; K:9 mm; B:100 mm; d:440 mm; db min.:476 mm; Fatigue load limit Pu:216 kN; Reference speed:1000 r/min; Basic dynamic load rating C:1170 kN; Limiting speed:1100 r/min; da max.:464 mm; D:540 mm; F:470 mm; D1 ≈:505 mm; r1,2 min.:2.1 mm; s max.:3.5 mm; rb max.:2 mm; Basic static load rating C0:3400 kN; ra max.:1.5 mm; |
192.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | D:175.0000 mm; Basic Dynamic Radial Load Rating C:185000 N; Basic Static Radial Load Rating Co:228000 N; Grease Speed Rating n1:2900 rpm; Oil Speed Rating n2:3500 rpm; Fillet Radius ra:2.00 mm; B:60.00 mm; d:110.000 mm; Fillet Radius rb:1.00 mm; |
25 0411 01 Rollix Slewing Ring Bearings | J max.:247.65 mm; L:304.8 mm; H2:47.625 mm; J min.:234.95 mm; Limiting speed:2800 r/min; Basic dynamic load rating C:212 kN; Mass bearing unit:11.3 kg; s:32.941 mm; Attachment bolt diameter G:19.05 mm; S:0.794 mm; da:69.85 mm; A:76.2 mm; H:160.338 mm; B:65.484 mm; H1:79.375 mm; |
192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 192.40.3150.990.41.1502 INTERCHANGE
Large Slewing Bearings Part series 192.40.3150.990.41.1502 is a potential replacement for these common bearing part numbers:
192.40.3150.990.41.1502
192.40.3150.990.41.1502
192.40.3150.990.41.1502
192.40.3150.990.41.1502
192.40.3150.990.41.1502
192.40.3150.990.41.1502
192.40.3150.990.41.1502
192.40.3150.990.41.1502
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 192.40.3150.990.41.1502 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing