Home>Products>Large Slewing Bearings>11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings
11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings
category
Large Slewing Bearings
Standard 5 11.30.2235.000.11.1503 Bearing SPECIFICATIONS
YOU’LL 100.000 mm d FIND BEARING-MALAYSIA SDN.BHD. AN EXTENSIVE SELECTION OF 11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings 2.50 mm Fillet Radius ra FOR SALE.
- Standard 5
11.30.2235.000.11.1503
- 2.50 mm
- 3600 rpm
- 100.000 mm
- 190000 N
- 190000 N
- 47.00 mm
- 215.0000 mm
- 2600 rpm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 2.50 mm
- 3600 rpm
- 100.000 mm
- 190000 N
- 190000 N
- 47.00 mm
- 215.0000 mm
- 2600 rpm
Standard 5 11.30.2235.000.11.1503 11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
23 0411 01 | Rollix | - | - | 30 mm | - | - | Tr 710x7 | 106 mm | - |
11.40.2915.001.41.1502 | Standard 5 | 250.0000 mm | - | - | - | 95.000 mm | - | 55.00 mm | - |
192.40.3550.990.41.1502 | Standard 5 | 200.0000 mm | - | - | - | 95.000 mm | - | 90.00 mm | - |
161.40.2368.890.11.1503 | Standard 5 | 480.0000 mm | - | - | - | 320.000 mm | - | 74.00 mm | - |
11.25.1800.000.11.1503 | Standard 5 | 680 mm | - | - | - | 560 mm | - | 56 mm | 655 mm |
161.50.2500.891.41.1503 | Standard 5 | 40.0000 mm | - | - | - | 17.000 mm | - | 12.00 mm | - |
11.40.3150.001.41.1502 | Standard 5 | 47 mm | - | - | - | 20 mm | - | 14 mm | - |
8 0307 | Rollix | 520.0000 mm | - | - | - | 380.000 mm | - | 65.00 mm | - |
11.40.2795.001.41.1502 | Standard 5 | - | 138 mm | - | - | - | - | - | - |
11.30.1734.000.11.1503 | Standard 5 | - | 222.25 mm | 42.069 mm | - | - | - | - | - |
8 04 | Rollix | - | - | 60.325 mm | - | - | - | - | - |
12.35.2500.000.11.1503 | Standard 5 | 260.0000 mm | - | - | - | 170.000 mm | - | 42.00 mm | - |
91.40.2395.990.11.1502 | Standard 5 | - | - | - | - | 38.1 mm | - | 49.2 mm | - |
91.40.2199.990.11.1502 | Standard 5 | 250 mm | - | - | - | 140 mm | - | - | - |
28 0411 01 | Rollix | 62.0000 mm | - | - | - | 30.000 mm | - | 23.80 mm | - |
11.40.2619.000.11.1502 | Standard 5 | 37.0000 mm | - | - | - | 20.000 mm | - | 18.00 mm | - |
3 036 | Rollix | 72 mm | - | - | - | 30 mm | - | 27 mm | - |
161.36.2000.891.41.1503 | Standard 5 | - | 292.1 mm | - | - | - | - | - | - |
161.36.1800.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
12.50.2559.201.49.1502 | Standard 5 | 72.0000 mm | - | - | - | 38.100 mm | - | 63.50 mm | - |
191.32.2500.990.41.1502 | Standard 5 | 90.0000 mm | - | - | - | 40.000 mm | - | 39.70 mm | - |
6 0307 | Rollix | - | 100.013 mm | - | - | - | - | 69.85 mm | - |
92.30.1799.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
12.30.1800.001.41.1503 | Standard 5 | 62.0000 mm | - | - | - | 17.000 mm | - | 17.00 mm | - |
61.50.2645.001.49.1504 | Standard 5 | 120.0000 mm | - | - | - | 55.000 mm | - | 49.20 mm | - |
92.40.2395.990.11.1502 | Standard 5 | 540 mm | - | - | - | 440 mm | - | 100 mm | - |
12.40.2622.401.41.1502 | Standard 5 | 95 mm | - | - | - | 60 mm | - | - | - |
91.50.2266.990.41.1502 | Standard 5 | 280.0000 mm | - | - | - | 180.000 mm | - | 46.00 mm | - |
161.45.2240.890.11.1503 | Standard 5 | 220 mm | - | 202.5 mm | - | 200 mm | - | 120 mm | - |
192.32.3150.990.41.1502 | Standard 5 | 170.0000 mm | - | - | - | 95.000 mm | - | 64.00 mm | - |
12.45.3400.100.19.1502 Standard 5 Slewing Ring Bearings | d3 max.:279.527 mm; Sleeve:S 144x7.1/2; B4:35.712 mm; d:220 mm; B1:183.566 mm; Mass adapter sleeve assembly:21 kg; G:219.151 mm; Threads per inch:8; B:32.004 mm; d1:190.5 mm; Hydraulic nut:HMVC 44E; |
12.35.1960.400.11.1503 Standard 5 Slewing Ring Bearings | Static axial stiffness, preload class D:93 N/µm; Fatigue load limit Pu:0.36 kN; Static axial stiffness, preload class A:36 N/µm; Preload class D GD:360 N; Calculation factor f2D:1.15; Static axial stiffness, preload class B:48 N/µm; Calculation factor f:1.09; da min.:43.2 mm; db min.:43.2 mm; Basic static load rating C0:8.5 kN; d1:47.1 mm; Da max.:58.8 mm; d2:47.1 mm; Mass bearing:0.11 kg; |
91.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | d:7 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0036 kg; B:12 mm; F:10 mm; |
191.25.2800.990.41.1502 Standard 5 Slewing Ring Bearings | h:210 mm; d2 max.:137 mm; α:6 °; Basic dynamic load rating C:245 kN; Specific dynamic load factor K:100 N/mm²; B:44 mm; r1 min.:1 mm; G:M 52x3; C1 max.:39 mm; l7 min.:73 mm; Mass rod end:5.7 kg; Material constant KM:330; l2 max.:281 mm; d:60 mm; l1 min.:115 mm; dk:80 mm; Basic static load rating C0:360 kN; |
92.35.1802.990.11.1502 Standard 5 Slewing Ring Bearings | H1:133.35 mm; End plug (suffix Y):EPR 27; L:419.1 mm; J max.:368.3 mm; P180°:107 kN; Cap bolt:5/8-11 UNC; Mass pillow block:60.3 kg; J min.:336.55 mm; Max. speed for PosiTrac Plus seal:1150 r/min; ba:53.975 mm; Initial grease fill:379.89 g; Ca:72.619 mm; H2:53.975 mm; Housing:SAFS 028 KA; J1:69.85 mm; Pa:22.2 kN; Labyrinth ring:2 x LOR 120; Appropriate attachment bolt size G:0.75 in; R2:30.163 mm; |
162.50.2660.891.41.1503 Standard 5 Slewing Ring Bearings | Associated spanner:TMFN 64-80; Mass lock nut:20.4 kg; d2:459.994 mm; Hexagonal head bolt:1/2-13x7/8; Threads per inch:5; B:52.654 mm; d1:461.975 mm; b:34.417 mm; h:15.342 mm; d3 max.:490.677 mm; B5:63.5 mm; G:419.913 mm; |
12.35.2690.000.11.1503 Standard 5 Slewing Ring Bearings | B:6 mm; d:5 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; D:10 mm; D1:12 mm; Tolerance shaft:e7; B1:2 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.003 kg; Coefficient of friction µ min.:0.08; |
161.45.2654.890.11.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:158 kN; B:92.075 mm; A1:95.25 mm; H2:57.15 mm; S:0.794 mm; H1:82.55 mm; s:31.75 mm; L:265.113 mm; d2:111.125 mm; J max.:223.838 mm; J min.:198.438 mm; Mass bearing unit:9.53 kg; Attachment bolt diameter G:19.05 mm; da:76.2 mm; A:68.263 mm; Limiting speed:3400 r/min; H:165.894 mm; |
2 0245 Rollix Slewing Ring Bearings | d:50.000 mm; Basic Dynamic Radial Load Rating C:48800 N; B:30.20 mm; Basic Static Radial Load Rating Co:39000 N; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6300 rpm; D:90.0000 mm; Grease Speed Rating n1:4800 rpm; Sealed Speed Rating n3:4800 rpm; |
192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | da:82.55 mm; Cap bolt recommended tightening torque:149.1 N·m; End plug (suffix Y):EPR 11; A2:206.375 mm; P90°:84.5 kN; Cap bolt:1/2-13 UNC; PG:1/8 NPT; H2:41.275 mm; L:349.25 mm; Max. speed for Taconite seal:950 r/min; Stabilizing ring:SR-18-15; H:196.85 mm; P180°:58.7 kN; Mass pillow block:31.3 kg; Housing:SSAFS 518; P150°:48 kN; H1:101.6 mm; Da:160 mm; RG:3/8 NPT; S:4.763 mm; |
121.40.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Calculation factor e:0.33; Comparative radial load rating CF:1340 kN; r3,4 min.:6.4 mm; d:482.6 mm; Calculation factor Y2:3; Basic dynamic load rating C:6300 kN; Fatigue load limit Pu:1080 kN; T:330.2 mm; Design variant/feature:TQON/GW; d1 ≈:502 mm; Thrust factor K:1.76; D:615.95 mm; B:330.2 mm; Basic static load rating C0:14300 kN; Calculation factor Y1:2; Calculation factor Y0:2; Comparative axial load rating CFa:222 kN; |
12.35.2690.001.41.1503 Standard 5 Slewing Ring Bearings | H:156 mm; Rα:45 °; Recommended diameter for attachment bolts, mm G:12 mm; Da:88.9 mm; s1:29.4 mm; Recommended tightening torque for grub screw:16.5 N·m; A1:13 mm; J6:106 mm; Db1:88 mm; B4:6.75 mm; Basic dynamic load rating C:25.5 kN; Housing material:Cast iron; Db2:96 mm; A:34.5 mm; N4:2 mm; Fatigue load limit Pu:0.655 kN; Hexagonal key size for grub screw N:4.763 mm; N:14 mm; SWN:7 mm; |
11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 11.30.2235.000.11.1503 INTERCHANGE
Large Slewing Bearings Part series 11.30.2235.000.11.1503 is a potential replacement for these common bearing part numbers:
11.30.2235.000.11.1503
11.30.2235.000.11.1503
11.30.2235.000.11.1503
11.30.2235.000.11.1503
11.30.2235.000.11.1503
11.30.2235.000.11.1503
11.30.2235.000.11.1503
11.30.2235.000.11.1503
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 11.30.2235.000.11.1503 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing