Home>Products>Large Slewing Bearings>62.50.2800.001.49.1504 Standard 5 Slewing Ring Bearings
62.50.2800.001.49.1504 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 62.50.2800.001.49.1504 Bearing SPECIFICATIONS
We 66.65 mm d2 ≈ Provide BEARING-MALAYSIA SDN.BHD. Extensive 62.50.2800.001.49.1504 Standard 5 Slewing Ring Bearings Selection And Competitive 96.5 kN Basic dynamic load rating C Wholesale Pricing.
- Standard 5
62.50.2800.001.49.1504
- 66.65 mm
- 96.5 kN
- 0.38
- 7500 r/min
- 0.0234
- 2.85 kN
- 0.87
- 120 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 66.65 mm
- 96.5 kN
- 0.38
- 7500 r/min
- 0.0234
- 2.85 kN
- 0.87
- 120 mm
- 0.68
- 1.4 kg
- 0.67
- 2 mm
- 114 mm
- 109 mm
- 1 mm
- 29 mm
- 0.92
- 80.19 mm
Standard 5 62.50.2800.001.49.1504 62.50.2800.001.49.1504 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
21 0541 01 | Rollix | - | - | - | - | 50 mm | M 52x3 | 35 mm | - |
162.45.2510.890.11.1503 | Standard 5 | - | - | - | - | 19.05 mm | - | 31 mm | - |
92.40.2395.990.11.1502 | Standard 5 | 540 mm | - | - | - | 440 mm | - | 100 mm | - |
12.30.1800.000.11.1503 | Standard 5 | - | - | - | - | 440 mm | Tr 440x5 | 60 mm | - |
192.40.4500.990.41.1502 | Standard 5 | 175.0000 mm | - | - | - | 110.000 mm | - | 60.00 mm | - |
121.36.4500.990.41.1502 | Standard 5 | - | 157.559 mm | 28.575 mm | - | - | - | - | - |
162.36.1900.890.11.1503 | Standard 5 | 100 mm | 39 mm | - | - | 45 mm | - | - | - |
12.40.2950.001.41.1502 | Standard 5 | 62 mm | - | - | - | 30 mm | - | - | - |
191.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.36.2000.891.41.1503 | Standard 5 | - | 292.1 mm | - | - | - | - | - | - |
191.50.5600.990.41.1502 | Standard 5 | 225.0000 mm | - | - | - | 105.000 mm | - | 49.00 mm | - |
12.40.2950.000.11.1502 | Standard 5 | - | - | 54.769 mm | - | - | - | - | - |
11.40.3150.000.11.1502 | Standard 5 | 300 mm | - | - | 94 mm | 220 mm | - | 95 mm | - |
121.40.5000.990.41.1502 | Standard 5 | 615.95 mm | - | - | - | 482.6 mm | - | 330.2 mm | - |
7 0380 01 | Rollix | 125 mm | - | - | - | 80 mm | - | - | - |
62.50.2800.001.49.1504 | Standard 5 | 120 mm | - | - | - | - | - | 29 mm | - |
191.40.4000.990.41.1502 | Standard 5 | 200.0000 mm | - | - | - | 110.000 mm | - | 69.80 mm | - |
29 0411 01 | Rollix | - | - | - | - | - | - | - | - |
161.28.1700.891.21.1503 | Standard 5 | 660 mm | - | 25.4 mm | - | 480 mm | - | 150 mm | - |
12.40.2622.400.11.1502 | Standard 5 | - | 107.95 mm | - | - | - | - | 73.025 mm | - |
12.45.2940.000.19.1502 | Standard 5 | - | - | - | - | - | - | - | - |
12.45.3400.100.19.1502 | Standard 5 | - | - | - | - | 220 mm | 219.151 mm | 32.004 mm | - |
192.50.5000.990.41.1501 | Standard 5 | 52.0000 mm | - | - | - | 25.000 mm | - | 20.60 mm | - |
12.45.3400.101.49.1502 | Standard 5 | 180.0000 mm | - | - | - | 100.000 mm | - | 34.00 mm | - |
192.32.3550.990.41.1502 | Standard 5 | 180.0000 mm | - | - | - | 100.000 mm | - | 34.00 mm | - |
192.25.2500.990.41.1502 | Standard 5 | 460 mm | 30 mm | - | - | 420 mm | - | - | - |
2 052 | Rollix | 140.0000 mm | - | - | - | 65.000 mm | - | 66.00 mm | - |
161.40.2128.891.41.1503 | Standard 5 | - | 473.075 mm | - | - | - | - | - | - |
162.45.2654.891.41.1503 Standard 5 Slewing Ring Bearings | Fatigue load limit Pu:0.2 kN; d1 ≈:24.5 mm; B:12 mm; Calculation factor f0:13; d:17 mm; Basic dynamic load rating C:9.56 kN; Limiting speed1):12000 r/min; r1,2 min.:0.6 mm; Mass complete bearing:0.06 kg; Basic static load rating C0:4.75 kN; D:40 mm; |
162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; A5:26 mm; Mass bearing unit:0.3 kg; Recommended diameter for attachment bolts, inch G:0.375 in; L:86 mm; A:30 mm; s1:18.3 mm; A1:15 mm; N:12.3 mm; Limiting speed:5000 r/min; Fatigue load limit Pu:0.28 kN; B:31 mm; Db:59 mm; Hexagonal key size for grub screw N:3.175 mm; J:63.5 mm; T:37.3 mm; |
161.28.1700.890.11.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:11000 rpm; Basic Static Radial Load Rating Co:6800 N; d:35.000 mm; Fillet Radius ra:0.64 mm; Accessories:One Shield; B:10.00 mm; Sealed Speed Rating n3:7500 rpm; D:55.0000 mm; Basic Dynamic Radial Load Rating C:9560 N; Oil Speed Rating Open/Shielded n2:14000 rpm; |
11.40.2915.001.41.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:3300 rpm; D:250.0000 mm; B:55.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:234000 N; Basic Static Radial Load Rating Co:275000 N; Fillet Radius ra:3.00 mm; d:95.000 mm; |
26 0411 01 Rollix Slewing Ring Bearings | Housing:SAF 617; Cap bolt recommended tightening torque:515.2 N·m; Max. speed for Taconite seal:1050 r/min; N1:25.4 mm; P180°:38.3 kN; H1:114.3 mm; Cap bolt, SAE grade:8; ba:48.419 mm; R2:30.163 mm; L:387.35 mm; Initial grease fill:181.44 g; H2:44.45 mm; A1:111.125 mm; R1:66.675 mm; P120°:35.6 kN; Taconite seal:TER 183; Mass pillow block:33.9 kg; P90°:56.5 kN; A2:231.775 mm; J max.:333.375 mm; |
121.45.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:5730 lbf; Thread Diameter G:1/2-13; Weight W:1.60 lb; Distance J:3.2500 in; Shaft Diameter D:1 7/16 in; Dimension H1:1.8750 in; Dimension S1:1.0000 in; Dimension L:4.5000 in; Width A:1.7500 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension F:0.7500 in; Height H:3.8750 in; |
8 0220 05 Rollix Slewing Ring Bearings | K:7.5 mm; Calculation factor Y1:1.9; Basic dynamic load rating C:713 kN; r3,4 min.:2.5 mm; Reference speed:2600 r/min; 2B:110 mm; Calculation factor Y0:1.8; Limiting speed:4300 r/min; b:15 mm; da max.:92 mm; Mass bearing pair:10.8 kg; Da min.:133 mm; D:160 mm; rc max.:1 mm; Ca min.:7 mm; r5 min.:1 mm; T:116 mm; Fatigue load limit Pu:102 kN; d:75 mm; Calculation factor e:0.35; |
91.40.2395.990.11.1502 Standard 5 Slewing Ring Bearings | N:14.3 mm; Recommended tightening torque for grub screw:6.5 N·m; Mass bearing unit:2.35 kg; T:53.2 mm; L:130.2 mm; RG:1/4-28 UNF; Basic dynamic load rating C:26 kN; Thread grub screw G2:5/16-24 UNF; B:49.2 mm; A:38.9 mm; A5:31.5 mm; Db2:100.1 mm; J:101.6 mm; Housing material:Stainless steel; A1:14.3 mm; Recommended diameter for attachment bolts, mm G:12 mm; Fatigue load limit Pu:0.8 kN; d:38.1 mm; |
35 0541 01 Rollix Slewing Ring Bearings | d:3.200 mm; Fillet Radius ra:0.30 mm; Shielded or Sealed B1:4.4 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:312 N; Basic Static Radial Load Rating Co:120 N; Width Plain B:4.4 mm; Grease Speed Rating Open/Shielded n1:75000 rpm; D:12.7000 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Sealed Speed Rating n3:52000 rpm; |
12.35.1960.401.41.1503 Standard 5 Slewing Ring Bearings | r1,2 min.:2.1 mm; Ba min.:8 mm; Calculation factor Y2:3.4; Fatigue load limit Pu:137 kN; D:280 mm; d2 ≈:195 mm; ra max.:2 mm; Da max.:268 mm; Calculation factor Y1:2.3; B:88 mm; db min.:180 mm; Mass bearing + sleeve:29.5 kg; B4:29 mm; K:7.5 mm; d3:220 mm; Calculation factor e:0.3; D1 ≈:244 mm; Limiting speed:2400 r/min; da max.:195 mm; Basic static load rating C0:1500 kN; |
161.40.2000.891.41.1503 Standard 5 Slewing Ring Bearings | B1:4 mm; Mass angle ring:0.023 kg; B2:8 mm; d:25 mm; d1 ≈:38.25 mm; r3,4 min.:1.1 mm; |
161.36.1700.891.41.1503 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:4150 N; Grease Speed Rating n1:14000 rpm; Oil Speed Rating n2:17000 rpm; B:18.00 mm; d:20.000 mm; Fillet Radius ra:1.00 mm; D:47.0000 mm; Basic Dynamic Radial Load Rating C:16800 N; |
62.50.2800.001.49.1504 Standard 5 Slewing Ring Bearings Video
Standard 5 62.50.2800.001.49.1504 INTERCHANGE
Large Slewing Bearings Part series 62.50.2800.001.49.1504 is a potential replacement for these common bearing part numbers:
62.50.2800.001.49.1504
62.50.2800.001.49.1504
62.50.2800.001.49.1504
62.50.2800.001.49.1504
62.50.2800.001.49.1504
62.50.2800.001.49.1504
62.50.2800.001.49.1504
62.50.2800.001.49.1504
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 62.50.2800.001.49.1504 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing