Home>Products>Large Slewing Bearings>192.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings
192.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings
category
Large Slewing Bearings
Standard 5 192.50.3550.990.41.1502 Bearing SPECIFICATIONS
100% Authentic. 192.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings Highest 226 mm B Quality. Certified BEARING-MALAYSIA SDN.BHD. 6 mm r1,2 min. Supplier.
- Standard 5
192.50.3550.990.41.1502
- 226 mm
- 6 mm
- 670 kN
- 12 mm
- 10000 kN
- 2.5
- 360 kg
- 5 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 226 mm
- 6 mm
- 670 kN
- 12 mm
- 10000 kN
- 2.5
- 360 kg
- 5 mm
- 466 mm
- 3.6
- 2.4
- 513 mm
- 664 mm
- 22.3 mm
- 440 mm
- 0.28
- 694 mm
- 6220 kN
- 513 mm
- 720 mm
Standard 5 192.50.3550.990.41.1502 192.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
6 04 | Rollix | 100 mm | - | - | - | 70 mm | - | 30 mm | - |
191.25.2800.990.41.1502 | Standard 5 | - | - | 210 mm | - | 60 mm | M 52x3 | 44 mm | - |
121.45.5000.990.41.1502 | Standard 5 | - | - | 45.244 mm | - | - | - | - | - |
62.50.2240.001.49.1504 | Standard 5 | - | - | - | - | 70 mm | - | - | - |
162.36.1900.890.11.1503 | Standard 5 | 100 mm | 39 mm | - | - | 45 mm | - | - | - |
38 0411 01 | Rollix | - | - | - | - | - | - | - | - |
11.50.3567.001.49.1502 | Standard 5 | - | 338.137 mm | 52.388 mm | - | - | - | - | - |
92.30.1799.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
121.45.6000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.40.2368.890.11.1503 | Standard 5 | - | 360.363 mm | - | - | - | - | - | - |
11.35.2220.000.11.1503 | Standard 5 | 720 mm | - | - | - | 440 mm | - | 226 mm | - |
11.30.1734.001.41.1503 | Standard 5 | 40.0000 mm | - | - | - | 17.000 mm | - | 12.00 mm | - |
91.35.1802.990.11.1502 | Standard 5 | 440.0000 mm | - | - | - | 210.000 mm | - | 168.00 mm | - |
11.50.2987.001.49.1502 | Standard 5 | - | 216 mm | - | - | - | - | 86 mm | - |
12.45.3400.100.19.1502 | Standard 5 | - | - | - | - | 220 mm | 219.151 mm | 32.004 mm | - |
92.50.2842.990.41.1502 | Standard 5 | - | 157.559 mm | - | - | - | - | - | - |
91.30.1799.990.11.1502 | Standard 5 | - | - | 56.356 mm | - | - | - | - | - |
161.50.3000.891.41.1503 | Standard 5 | - | - | - | - | 30 mm | - | 20.5 mm | - |
162.50.2800.891.41.1503 | Standard 5 | - | - | - | - | 40 mm | M 39x3 | 28 mm | - |
6 0307 | Rollix | - | 100.013 mm | - | - | - | - | 69.85 mm | - |
12.40.2950.000.11.1502 | Standard 5 | - | - | 54.769 mm | - | - | - | - | - |
91.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | Pu:1690 kN; Static (Cor):16.7 mm; with cylindrical bore:710 min-1; d:240 mm; B:128 mm; rs (min):4 mm; Dynamic (Cr):9 mm; Grease:2860 kN; with tapered bore:840 min-1; Oil:246.040 kN; D:400 mm; |
8 0340 04 Rollix Slewing Ring Bearings | Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Mass bushing:0.2 kg; Tolerance shaft:h8; B:35 mm; Permissible sliding velocity v max.:5 m/s; B1:5 mm; Coefficient of friction µ max.:0.1; D:55 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; D1:65 mm; d:45 mm; Specific static load factor K0:20 N/mm²; |
91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:773 kN; D:250 mm; 2B:84 mm; Limiting speed:2600 r/min; r3,4 min.:3 mm; Calculation factor Y1:1.6; b:10 mm; Reference speed:1500 r/min; da max.:164 mm; rc max.:1 mm; d:140 mm; Calculation factor Y2:2.3; Calculation factor Y0:1.6; Basic static load rating C0:1140 kN; Mass bearing pair:17.9 kg; Fatigue load limit Pu:116 kN; K:7.5 mm; T:91.5 mm; Da min.:219 mm; Ca min.:8 mm; |
11.30.2031.600.11.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:23000 rpm; B:7.00 mm; D:22.0000 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:3250 N; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N; Oil Speed Rating Open/Shielded n2:43000 rpm; d:8.000 mm; Accessories:One Seal; |
8 0307 Rollix Slewing Ring Bearings | Sealed Speed Rating n3:950 rpm; B:65.00 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; d:380.000 mm; D:520.0000 mm; Basic Static Radial Load Rating Co:530000 N; Accessories:Without Accessories; Fillet Radius ra:4.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Dynamic Radial Load Rating C:338000 N; |
29 0411 01 Rollix Slewing Ring Bearings | Recommended tightening torque for grub screw:16.5 N·m; Basic dynamic load rating C:25.5 kN; N:14.8 mm; Recommended diameter for attachment bolts, inch G:0.5 in; J:92 mm; s1:32.3 mm; A1:17 mm; B1:51.1 mm; Db:90 mm; T:53.3 mm; Da:106.4 mm; Housing material:Composite; Basic static load rating C0:15.3 kN; Thread grub screw G2:M10x1; Hexagonal key size for grub screw N:5 mm; L:118 mm; A3:3.2 mm; |
6 0508 Rollix Slewing Ring Bearings | Dimension series:3FC; B:50 mm; T:53 mm; Calculation factor Y0:0.8; Limiting speed:3400 r/min; C:43 mm; ra max.:3 mm; Cb min.:10 mm; rb max.:2.5 mm; Db min.:180 mm; Mass bearing:6.02 kg; r3,4 min.:2.5 mm; Basic static load rating C0:510 kN; Calculation factor e:0.43; Basic dynamic load rating C:443 kN; Da min.:161 mm; r1,2 min.:3 mm; d1 ≈:143.2 mm; Reference speed:2800 r/min; db min.:119 mm; |
91.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | d:7 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0036 kg; B:12 mm; F:10 mm; |
91.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | H2:41.275 mm; Cap bolt:2 x 5/8-11 UNC; Bearing limiting speed:5300 r/min; h:38.1 mm; H1:101.6 mm; P180°:49.8 kN; P120°:45.4 kN; RG:3/8 NPT; P90°:72.5 kN; H:192.484 mm; Housing:SAF 518; Pa:10.9 kN; A2:149.225 mm; P150°:40.5 kN; L:349.25 mm; R2:27.781 mm; Initial grease fill:141.75 g; J max.:298.45 mm; N1:22.225 mm; Cap bolt, SAE grade:5; |
2 0422 Rollix Slewing Ring Bearings | Initial grease fill:68.04 g; Da:130 mm; Housing:SSAFS 515; Ca:37.008 mm; da:61.913 mm; A2:120.65 mm; PosiTrac Plus contact element:2 x B10724-37; ba:32.544 mm; Cap bolt:2 x 1/2-13 UNC; R1:46.038 mm; S:3.175 mm; Pa:6.94 kN; H2:30.163 mm; P180°:40 kN; A1:79.375 mm; h:28.575 mm; P60°:104 kN; P150°:33.4 kN; Mass pillow block:14.3 kg; P90°:59.6 kN; |
12.35.1960.400.11.1503 Standard 5 Slewing Ring Bearings | Static axial stiffness, preload class D:93 N/µm; Fatigue load limit Pu:0.36 kN; Static axial stiffness, preload class A:36 N/µm; Preload class D GD:360 N; Calculation factor f2D:1.15; Static axial stiffness, preload class B:48 N/µm; Calculation factor f:1.09; da min.:43.2 mm; db min.:43.2 mm; Basic static load rating C0:8.5 kN; d1:47.1 mm; Da max.:58.8 mm; d2:47.1 mm; Mass bearing:0.11 kg; |
11.40.2915.001.41.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:3300 rpm; D:250.0000 mm; B:55.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:234000 N; Basic Static Radial Load Rating Co:275000 N; Fillet Radius ra:3.00 mm; d:95.000 mm; |
192.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 192.50.3550.990.41.1502 INTERCHANGE
Large Slewing Bearings Part series 192.50.3550.990.41.1502 is a potential replacement for these common bearing part numbers:
192.50.3550.990.41.1502
192.50.3550.990.41.1502
192.50.3550.990.41.1502
192.50.3550.990.41.1502
192.50.3550.990.41.1502
192.50.3550.990.41.1502
192.50.3550.990.41.1502
192.50.3550.990.41.1502
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 192.50.3550.990.41.1502 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing