Home>Products>Large Slewing Bearings>162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings
162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings
category
Large Slewing Bearings
Standard 5 162.50.3000.891.41.1503 Bearing SPECIFICATIONS
LET OUR 162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings EXPERTS GET YOU THE PARTS BEARING-MALAYSIA SDN.BHD. YOU 58.9 mm T NEED. 88.9 mm Da
- Standard 5
162.50.3000.891.41.1503
- 58.9 mm
- Cast iron
- 88.9 mm
- 16 mm
- 98 mm
- 3.2 mm
- 24.5 mm
- 143.5 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 58.9 mm
- Cast iron
- 88.9 mm
- 16 mm
- 98 mm
- 3.2 mm
- 24.5 mm
- 143.5 mm
- 950 r/min
- 3.175 mm
- 14 mm
- 102 mm
- 40 mm
- 34.9 mm
- 1/4-28 UNF
- 19 kN
- FYTB 508 M/VZ033
- 56.3 mm
- 0.8 kN
- 4 N·m
Standard 5 162.50.3000.891.41.1503 162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
92.40.2003.991.41.1502 | Standard 5 | - | - | 46.831 mm | - | - | - | - | - |
161.40.2240.890.11.1503 | Standard 5 | - | - | - | - | 50 mm | - | - | - |
192.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | 28 mm | - |
161.36.2000.891.41.1503 | Standard 5 | - | 292.1 mm | - | - | - | - | - | - |
92.40.2199.990.11.1502 | Standard 5 | - | - | - | - | 30.163 mm | M16 | 38.1 mm | - |
161.36.1900.890.11.1503 | Standard 5 | 80 mm | - | - | - | 25 mm | - | 21 mm | - |
191.50.5000.990.41.1502 | Standard 5 | 3.8750 in | - | - | - | 2.500 in | - | 0.6875 in | - |
12.40.2950.001.41.1502 | Standard 5 | 62 mm | - | - | - | 30 mm | - | - | - |
192.40.4500.990.41.1502 | Standard 5 | 175.0000 mm | - | - | - | 110.000 mm | - | 60.00 mm | - |
12.30.1995.000.11.1503 | Standard 5 | 70 mm | - | - | - | 65 mm | - | 55 mm | - |
21 0411 01 | Rollix | 200.0000 mm | - | - | - | 95.000 mm | - | 45.00 mm | - |
161.40.2368.890.11.1503 | Standard 5 | 480.0000 mm | - | - | - | 320.000 mm | - | 74.00 mm | - |
121.36.4250.990.41.1502 | Standard 5 | 12 mm | - | - | - | 7 mm | - | 8 mm | - |
29 0541 01 | Rollix | 215 mm | - | - | - | 120 mm | - | - | - |
11.50.3567.001.49.1502 | Standard 5 | - | 338.137 mm | 52.388 mm | - | - | - | - | - |
192.40.2800.990.41.1502 | Standard 5 | 4.76 Inch | 120.904 Millimeter | - | - | - | 4.5 Inch | 114.3 Millimeter | - | - | - |
161.40.2000.891.41.1503 | Standard 5 | - | - | - | - | 25 mm | - | - | - |
24 0541 01 | Rollix | 160.0000 mm | - | - | - | 75.000 mm | - | 37.00 mm | - |
7 0380 01 | Rollix | 125 mm | - | - | - | 80 mm | - | - | - |
161.36.1800.890.11.1503 | Standard 5 | - | - | - | - | - | - | 52 mm | - |
191.25.2800.990.41.1502 | Standard 5 | - | - | 210 mm | - | 60 mm | M 52x3 | 44 mm | - |
192.32.2800.990.41.1502 | Standard 5 | - | 156 mm | - | - | 31.75 mm | - | - | - |
192.25.2240.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
92.40.2395.990.11.1502 | Standard 5 | 540 mm | - | - | - | 440 mm | - | 100 mm | - |
161.45.2510.890.11.1503 | Standard 5 | - | - | - | - | 180 mm | - | 10 mm | - |
162.40.2000.891.41.1503 | Standard 5 | - | 695 mm | - | - | - | - | - | - |
92.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:2350 r/min; Cap bolt:2 x 5/8-11 UNC; J max.:295.275 mm; da:61.913 mm; PG:1/8 NPT; Cap bolt recommended tightening torque:298.3 N·m; A2:149.225 mm; L:349.25 mm; Stabilizing ring:2 x SR-1615; RG:3/8 NPT; PosiTrac Plus contact element:2 x B10724-37; H1:101.6 mm; P180°:49.8 kN; J min.:263.525 mm; Housing:SAF 615; N1:22.225 mm; h:42.862 mm; End plug (suffix Y):EPR 7; |
2 0422 Rollix Slewing Ring Bearings | Initial grease fill:68.04 g; Da:130 mm; Housing:SSAFS 515; Ca:37.008 mm; da:61.913 mm; A2:120.65 mm; PosiTrac Plus contact element:2 x B10724-37; ba:32.544 mm; Cap bolt:2 x 1/2-13 UNC; R1:46.038 mm; S:3.175 mm; Pa:6.94 kN; H2:30.163 mm; P180°:40 kN; A1:79.375 mm; h:28.575 mm; P60°:104 kN; P150°:33.4 kN; Mass pillow block:14.3 kg; P90°:59.6 kN; |
161.40.2240.891.41.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:19 kN; Basic dynamic load rating C:30.7 kN; T:49.9 mm; Recommended diameter for attachment bolts, mm G:12 mm; Housing:FY 508 M/VZ033; RG:1/4-28 UNF; A:38.5 mm; A3:3.2 mm; N4:4 mm; Mass bearing unit:1.8 kg; L:130 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Fatigue load limit Pu:0.8 kN; Housing material:Cast iron; J7:34 mm; Db1:98 mm; J:101.5 mm; Da:115.9 mm; |
162.36.2000.890.11.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:2700 kN; Calculation factor Y:0.4; Mass bearing:30 kg; D1 ≈:508 mm; Calculation factor kr:0.11; d1 ≈:474 mm; Calculation factor e:0.3; r1,2 min.:2.1 mm; D:540 mm; das:469 mm; da min.:451 mm; B:60 mm; d:440 mm; Da max.:529 mm; E:516 mm; ra max.:2 mm; Fatigue load limit Pu:232 kN; Basic dynamic load rating C:1060 kN; s max.:3.5 mm; Limiting speed:560 r/min; |
8 04 Rollix Slewing Ring Bearings | L:539.75 mm; J1:95.25 mm; Labyrinth ring:2 x LOR 114; P60°:230 kN; P180°:96.1 kN; Da:259.999 mm; R2:39.688 mm; Pa:30.9 kN; h:60.325 mm; J max.:463.55 mm; Stabilizing ring:SR-0-24; H1:160.325 mm; R1:95.25 mm; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; Housing:SAF 624; P120°:87.2 kN; A2:215.9 mm; A1:158.75 mm; Cap bolt recommended tightening torque:203.4 N·m; |
162.50.2800.891.41.1503 Standard 5 Slewing Ring Bearings | G:M 39x3; l7 min.:50 mm; d2 max.:94 mm; d:40 mm; Specific dynamic load factor K:150 N/mm²; α:6 °; dk:53 mm; l3 min.:65 mm; Basic static load rating C0:166 kN; l4 max.:191 mm; B:28 mm; h1:142 mm; r1 min.:0.6 mm; d4 ≈:58 mm; w:50 mm; l5 ≈:25 mm; Material constant KM:330; Mass rod end:2.2 kg; C1 max.:24 mm; Basic dynamic load rating C:150 kN; |
91.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:39000 N; D:175.0000 mm; B:18.00 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:46500 N; d:140.000 mm; Sealed Speed Rating n3:2000 rpm; |
162.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | Initial grease fill:181.44 g; RG:3/8 NPT; J1:60.325 mm; Housing:SAW 220; R1:65.088 mm; P180°:42.3 kN; N1:22.225 mm; H1:114.3 mm; Ca:70.104 mm; ba:52.388 mm; Taconite seal (dc shaft position):TER 106; A2:219.075 mm; Stabilizing ring:SR-20-17; S:4.763 mm; J max.:333.375 mm; Cap bolt:2 x 3/4-10 UNC; da:180 mm; L:387.35 mm; Da:180 mm; A1:111.125 mm; |
192.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:3400 rpm; B:34.00 mm; Oil Speed Rating n2:4000 rpm; d:100.000 mm; Basic Dynamic Radial Load Rating C:68900 N; D:180.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:30000 N; |
3 036 Rollix Slewing Ring Bearings | Oil:8 400 min-1; Grease:0.400 kN; with cylindrical bore:10 000 min-1; d:30 mm; B1:mm; rs Dynamic (Cr):1.1 mm; Static (Cor):32.340 kN; B:27 mm; Pu:8.740 kN; with tapered bore:2306 ; D:72 mm; |
36 0411 01 Rollix Slewing Ring Bearings | Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:111000 N; B:35.00 mm; Grease Speed Rating n1:4100 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5300 rpm; d:70.000 mm; Basic Static Radial Load Rating Co:85000 N; D:150.0000 mm; |
8 0405 05 Rollix Slewing Ring Bearings | r3,4 min.:0.3 mm; d:20 mm; Calculation factor f2B:1.03; Calculation factor f2C:1.05; Preload class C GC:235 N; Preload class B GB:120 N; Static axial stiffness, preload class C:44 N/µm; Calculation factor f0:7.2; Calculation factor f1:1; Calculation factor f:1.04; d1:26.6 mm; D:42 mm; Calculation factor f2A:1; Static axial stiffness, preload class B:32 N/µm; B:12 mm; da max.:26.2 mm; Attainable speed for grease lubrication:54000 r/min; |
162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 162.50.3000.891.41.1503 INTERCHANGE
Large Slewing Bearings Part series 162.50.3000.891.41.1503 is a potential replacement for these common bearing part numbers:
162.50.3000.891.41.1503
162.50.3000.891.41.1503
162.50.3000.891.41.1503
162.50.3000.891.41.1503
162.50.3000.891.41.1503
162.50.3000.891.41.1503
162.50.3000.891.41.1503
162.50.3000.891.41.1503
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 162.50.3000.891.41.1503 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing