Home>Products>Large Slewing Bearings>12.40.2622.401.41.1502 Standard 5 Slewing Ring Bearings
12.40.2622.401.41.1502 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 12.40.2622.401.41.1502 Bearing SPECIFICATIONS
12.40.2622.401.41.1502 Standard 5 Slewing Ring Bearings Warehouse offers car parts and car accessories. We sell discount Large Slewing Bearings online BEARING-MALAYSIA SDN.BHD. as well 66 mm da min. as cheap 0.39 kg Mass bearing machinery parts.
- Standard 5
12.40.2622.401.41.1502
- 0.39 kg
- 66 mm
- 0.6 mm
- 7.938 mm
- 1
- 200 N/µm
- 0.92
- 0.99
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 0.39 kg
- 66 mm
- 0.6 mm
- 7.938 mm
- 1
- 200 N/µm
- 0.92
- 0.99
- 150 N
- 90.8 mm
- 1.08
- 60 mm
- 870 N
- 27.3 mm
- 12.2 kN
- 1.01
- 72.74 mm
- 0.6 mm
- 95 mm
- 0.52 kN
Standard 5 12.40.2622.401.41.1502 12.40.2622.401.41.1502 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
162.45.2240.890.11.1503 | Standard 5 | 110.0000 mm | - | - | - | 60.000 mm | - | 38.10 mm | - |
192.25.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
11.50.4140.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
192.50.3150.990.41.1502 | Standard 5 | - | 134.938 mm | 33.337 mm | - | - | - | - | - |
192.50.6735.990.41.1502 | Standard 5 | 72 mm | - | - | - | 35 mm | - | 17 mm | - |
12.40.3300.000.11.1502 | Standard 5 | 1060 mm | - | - | - | 800 mm | - | 370 mm | - |
62.50.1800.001.49.1504 | Standard 5 | 260 mm | - | - | 80 mm | - | - | - | - |
12.35.2690.000.11.1503 | Standard 5 | 10 mm | - | - | - | 5 mm | - | 6 mm | - |
12.40.2199.300.11.1502 | Standard 5 | - | - | - | - | 120 mm | M 120x2 | 20 mm | - |
11.40.2240.000.11.1502 | Standard 5 | - | - | - | - | 150 mm | M 150x2 | 24 mm | - |
92.35.2012.991.41.1502 | Standard 5 | - | - | 42.862 mm | - | - | - | - | - |
161.40.2240.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.40.2795.001.41.1502 | Standard 5 | - | 138 mm | - | - | - | - | - | - |
11.30.2235.001.41.1503 | Standard 5 | 1220 mm | - | - | - | 1000 mm | - | 100 mm | 1165 mm |
29 0411 01 | Rollix | - | - | - | - | - | - | - | - |
121.36.4750.990.41.1502 | Standard 5 | - | - | - | - | 20 mm | - | 26.5 mm | - |
92.40.2395.990.11.1502 | Standard 5 | 540 mm | - | - | - | 440 mm | - | 100 mm | - |
61.50.1900.001.49.1504 | Standard 5 | - | 257.175 mm | 46.831 mm | - | - | - | - | - |
11.40.2619.000.11.1502 | Standard 5 | 37.0000 mm | - | - | - | 20.000 mm | - | 18.00 mm | - |
12.50.3520.001.49.1502 | Standard 5 | - | 144.463 mm | - | - | - | - | 85.725 mm | - |
11.30.2235.000.11.1503 | Standard 5 | 215.0000 mm | - | - | - | 100.000 mm | - | 47.00 mm | - |
191.40.4500.990.41.1502 | Standard 5 | - | - | - | - | 40 mm | M 42x3 | 28 mm | - |
11.40.2795.000.11.1502 Standard 5 Slewing Ring Bearings | Basic static load rating C0:11.4 kN; Calculation factor X:0.41; Limiting speed:26000 r/min; Calculation factor Y1:0.92; Calculation factor e:0.68; Calculation factor A:0.000656; a:16 mm; D1 ≈:41.66 mm; Calculation factor kr:0.095; ra max.:1 mm; Mass bearing:0.13 kg; r1,2 min.:1 mm; d1 ≈:35.8 mm; Da max.:46.4 mm; da min.:30.6 mm; Calculation factor Y0:0.76; d2 ≈:30.773 mm; B:15 mm; |
12.45.3400.100.19.1502 Standard 5 Slewing Ring Bearings | d3 max.:279.527 mm; Sleeve:S 144x7.1/2; B4:35.712 mm; d:220 mm; B1:183.566 mm; Mass adapter sleeve assembly:21 kg; G:219.151 mm; Threads per inch:8; B:32.004 mm; d1:190.5 mm; Hydraulic nut:HMVC 44E; |
91.50.2446.990.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4300 rpm; d:65.000 mm; D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; B:58.70 mm; Basic Static Radial Load Rating Co:108000 N; Accessories:Shield & Seal; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:138000 N; |
91.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | H2:41.275 mm; Cap bolt:2 x 5/8-11 UNC; Bearing limiting speed:5300 r/min; h:38.1 mm; H1:101.6 mm; P180°:49.8 kN; P120°:45.4 kN; RG:3/8 NPT; P90°:72.5 kN; H:192.484 mm; Housing:SAF 518; Pa:10.9 kN; A2:149.225 mm; P150°:40.5 kN; L:349.25 mm; R2:27.781 mm; Initial grease fill:141.75 g; J max.:298.45 mm; N1:22.225 mm; Cap bolt, SAE grade:5; |
11.25.1800.001.41.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:1677 kN; b:50.8 mm; Calculation factor Y2:1.15; Calculation factor e:0.88; B:200 mm; d:305.033 mm; Calculation factor Y0:0.8; r1,2 min.:3.3 mm; D:560 mm; D1 ≈:450 mm; Fatigue load limit Pu:430 kN; Mass bearing:205 kg; h:25.4 mm; Comparative radial load rating CF:765 kN; Calculation factor Y1:0.77; Comparative axial load rating CFa:657 kN; T:199.263 mm; r3,4 min.:6.4 mm; |
161.40.2368.891.41.1503 Standard 5 Slewing Ring Bearings | rb max.:1 mm; B:22.225 mm; d:25.4 mm; Material constant KM:330; α:6 °; b1:3 mm; Sealing solution:Triple-lip seals; Specific static load factor K0:300 N/mm²; dk:36.5 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.3 mm; C:19.05 mm; da max.:29 mm; Lubricant:Regular relubricatio; b:3.2 mm; Basic static load rating C0:166 kN; r2 min.:1 mm; ra max.:0.3 mm; Design (sliding contact surface combination):Steel/steel; |
161.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | B:74.00 mm; D:480.0000 mm; Oil Speed Rating Open/Shielded n2:1400 rpm; Fillet Radius ra:3.00 mm; d:320.000 mm; Basic Dynamic Radial Load Rating C:371000 N; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:1100 rpm; Basic Static Radial Load Rating Co:540000 N; Sealed Speed Rating n3:730 rpm; |
192.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Max. speed for Taconite seal:440 r/min; N1:34.925 mm; Mass pillow block:172 kg; Taconite seal:TER 154; Housing:SAW 538; End plug (suffix Y):EPR 21; da:174.625 mm; H1:200.025 mm; P180°:113 kN; Ca:129.819 mm; Appropriate attachment bolt size G:1.25 in; Eye bolt:2 x 3/8-16 UNC; J min.:549.275 mm; ba:92.869 mm; L:711.2 mm; P120°:107 kN; P60°:290 kN; Pa:68.5 kN; R1:120.65 mm; P150°:94.3 kN; |
12.35.2690.001.41.1503 Standard 5 Slewing Ring Bearings | H:156 mm; Rα:45 °; Recommended diameter for attachment bolts, mm G:12 mm; Da:88.9 mm; s1:29.4 mm; Recommended tightening torque for grub screw:16.5 N·m; A1:13 mm; J6:106 mm; Db1:88 mm; B4:6.75 mm; Basic dynamic load rating C:25.5 kN; Housing material:Cast iron; Db2:96 mm; A:34.5 mm; N4:2 mm; Fatigue load limit Pu:0.655 kN; Hexagonal key size for grub screw N:4.763 mm; N:14 mm; SWN:7 mm; |
192.40.4000.990.41.1502 Standard 5 Slewing Ring Bearings | D1 ≈:257 mm; Mass bearing:45.3 kg; T:225.425 mm; B:225.425 mm; Calculation factor Y0:1.6; Basic dynamic load rating C:1760 kN; Design variant/feature:TQO/GWI; Thrust factor K:1.48; D:284.162 mm; d1 ≈:216 mm; Calculation factor Y2:2.5; Calculation factor e:0.4; r3,4 min.:3.3 mm; d:198.438 mm; Basic static load rating C0:3750 kN; r1,2 min.:3.3 mm; Fatigue load limit Pu:355 kN; Comparative radial load rating CF:430 kN; |
121.36.4500.990.41.1502 Standard 5 Slewing Ring Bearings | P90°:32.5 kN; Da:130 mm; H:157.559 mm; PG:1/8 NPT; J1:47.625 mm; Housing:FSAF 215; N1:15.875 mm; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt:2 x 1/2-13 UNC; da:75 mm; Stabilizing ring:SR-15-0; h:28.575 mm; J max.:244.475 mm; Labyrinth ring (dc shaft position):LOR 46; R2:21.431 mm; Ca:37.008 mm; R1:46.038 mm; Initial grease fill:68.04 g; dc:71.438 mm; J min.:219.075 mm; |
12.30.2538.001.41.1503 Standard 5 Slewing Ring Bearings | R2:30.163 mm; A2:155.575 mm; Stabilizing ring:2 x 38151-24; Cap bolt recommended tightening torque:298.3 N·m; ba:46.831 mm; Pa:16.7 kN; End plug (suffix Y):EPR 14; J min.:295.275 mm; P90°:84.5 kN; RG:3/8 NPT; PosiTrac Plus contact element:2 x B10724-113; P180°:57.4 kN; Appropriate attachment bolt size G:0.875 in; N1:26.988 mm; J1:60.325 mm; h:40.481 mm; R1:65.088 mm; Labyrinth ring:2 x LOR 113; |
12.40.2622.401.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 12.40.2622.401.41.1502 INTERCHANGE
Large Slewing Bearings Part series 12.40.2622.401.41.1502 is a potential replacement for these common bearing part numbers:
12.40.2622.401.41.1502
12.40.2622.401.41.1502
12.40.2622.401.41.1502
12.40.2622.401.41.1502
12.40.2622.401.41.1502
12.40.2622.401.41.1502
12.40.2622.401.41.1502
12.40.2622.401.41.1502
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 12.40.2622.401.41.1502 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing