Home>Products>Large Slewing Bearings>28 0411 01 Rollix Slewing Ring Bearings
28 0411 01 Rollix Slewing Ring Bearings
category
Large Slewing Bearings
Rollix 28 0411 01 Bearing SPECIFICATIONS
28 0411 01 Rollix Slewing Ring Bearings Needs 7000 rpm Grease Speed Rating n1 Analysis 62.0000 mm D , Large Slewing Bearings Manufacturing 7000 rpm Sealed Speed Rating n3 Service . Get Your BEARING-MALAYSIA SDN.BHD. Free.
- Rollix
28 0411 01
- 62.0000 mm
- 7000 rpm
- 7000 rpm
- 23.80 mm
- 30.000 mm
- 1.00 mm
- Two Shields & Snap-R
- 9500 rpm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 62.0000 mm
- 7000 rpm
- 7000 rpm
- 23.80 mm
- 30.000 mm
- 1.00 mm
- Two Shields & Snap-R
- 9500 rpm
- 28600 N
- 20400 N
Rollix 28 0411 01 28 0411 01 Rollix Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
192.40.4500.990.41.1502 | Standard 5 | 175.0000 mm | - | - | - | 110.000 mm | - | 60.00 mm | - |
162.40.2000.891.41.1503 | Standard 5 | - | 695 mm | - | - | - | - | - | - |
92.35.1802.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
191.32.4000.990.41.1502 | Standard 5 | - | - | - | - | 12 mm | - | 12 mm | - |
161.45.2510.891.41.1503 | Standard 5 | - | - | - | - | - | Tr 480x5 | 300 mm | - |
162.28.1700.891.21.1503 | Standard 5 | 320 mm | - | - | - | - | - | 108 mm | - |
192.40.4000.990.41.1502 | Standard 5 | 284.162 mm | - | - | - | 198.438 mm | - | 225.425 mm | - |
192.50.4500.990.41.1502 | Standard 5 | 340 mm | - | - | - | 220 mm | - | 90 mm | - |
24 0541 01 | Rollix | 160.0000 mm | - | - | - | 75.000 mm | - | 37.00 mm | - |
162.40.2128.891.41.1503 | Standard 5 | 250.0000 mm | - | - | - | 95.000 mm | - | 55.00 mm | - |
25 0411 01 | Rollix | - | 160.338 mm | - | - | - | - | 65.484 mm | - |
62.50.2800.001.49.1504 | Standard 5 | 120 mm | - | - | - | - | - | 29 mm | - |
192.50.6300.990.41.1502 | Standard 5 | 62.0000 mm | - | - | - | 30.000 mm | - | 27.00 mm | - |
36 0411 01 | Rollix | 150.0000 mm | - | - | - | 70.000 mm | - | 35.00 mm | - |
61.50.2130.001.49.1504 | Standard 5 | - | - | - | - | 220 mm | 219.151 mm | 32.004 mm | - |
37 0411 01 | Rollix | - | 156 mm | - | - | - | - | - | - |
162.45.2654.890.11.1503 | Standard 5 | 400 mm | - | - | - | - | Tr 240x4 | - | - |
12.30.2538.001.41.1503 | Standard 5 | - | - | 40.481 mm | - | - | - | - | - |
11.35.2220.000.11.1503 | Standard 5 | 720 mm | - | - | - | 440 mm | - | 226 mm | - |
12.35.2690.000.11.1503 | Standard 5 | 10 mm | - | - | - | 5 mm | - | 6 mm | - |
92.50.2644.990.41.1502 | Standard 5 | 200.0000 mm | - | - | - | 95.000 mm | - | 77.80 mm | - |
37 0411 01 Rollix Slewing Ring Bearings | T:46.4 mm; Basic dynamic load rating C:25.5 kN; Db1:88 mm; Basic static load rating C0:15.3 kN; H:156 mm; Recommended diameter for attachment bolts, mm G:12 mm; L:96 mm; J6:106 mm; Housing material:Cast iron; Recommended tightening torque for grub screw:6.5 N·m; J:130 mm; N:14 mm; Limiting speed:1100 r/min; Thread grub screw G2:5/16-24 UNF; A3:3.2 mm; Housing:FYTB 507 M/VZ033; Rα:45 °; |
161.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | Weight:0.53 kg; D:80 mm; ra:1.5 max; Dynamic (Cr):36.000 kN; da:34 min; Bearing designation:6405 ; B:21 mm; d:25 mm; Static (Cor):19.200 kN; Da:70 max; rs:1.5 mm; Grease:9 400 min-1; Pu:0.873 kN; Oil:11 000 min-1; |
161.45.2366.890.11.1503 Standard 5 Slewing Ring Bearings | R2:46.831 mm; R1:130.175 mm; ba:96.838 mm; Cap bolt recommended tightening torque:4284.4 N·m; Ca:117.805 mm; P120°:260 kN; Cap bolt, SAE grade:8; Max. speed for Taconite seal:325 r/min; Stabilizing ring:2 x A8898; H:473.075 mm; P60°:691 kN; Taconite seal:TER 553; RG:1 NPT; PG:1/4 NPT; da:239.713 mm; Pa:81.4 kN; Initial grease fill:2749.95 g; P150°:236 kN; P180°:285 kN; A2:368.3 mm; |
12.50.3839.001.49.1502 Standard 5 Slewing Ring Bearings | Mass bushing:0.002 kg; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; B:8 mm; Coefficient of friction µ max.:0.1; d:8 mm; D:11 mm; |
162.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | ba:24.606 mm; Da:90 mm; h:30.956 mm; End plug (suffix Y):EPR 3; H1:63.5 mm; Pa:8.9 kN; Initial grease fill:65.205 g; da:40 mm; R2:15.875 mm; Cap bolt, SAE grade:8; A2:172.244 mm; Taconite seal (dc shaft position):TER 17; P60°:32.5 kN; J max.:177.8 mm; Appropriate attachment bolt size G:0.5 in; H:125.412 mm; Taconite seal (db shaft position):TER 24; Ca:42.799 mm; A1:60.325 mm; Housing:SAF 308; |
92.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:2350 r/min; Cap bolt:2 x 5/8-11 UNC; J max.:295.275 mm; da:61.913 mm; PG:1/8 NPT; Cap bolt recommended tightening torque:298.3 N·m; A2:149.225 mm; L:349.25 mm; Stabilizing ring:2 x SR-1615; RG:3/8 NPT; PosiTrac Plus contact element:2 x B10724-37; H1:101.6 mm; P180°:49.8 kN; J min.:263.525 mm; Housing:SAF 615; N1:22.225 mm; h:42.862 mm; End plug (suffix Y):EPR 7; |
162.40.2240.890.11.1503 Standard 5 Slewing Ring Bearings | B:23.00 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:5300 rpm; d:65.000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Grease Speed Rating n1:5300 rpm; Sealed Speed Rating n3:3600 rpm; D:120.0000 mm; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:55900 N; Basic Static Radial Load Rating Co:40500 N; Fillet Radius ra:1.50 mm; |
121.45.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Minimum axial load factor A:130; Reference speed:110 r/min; d1:1050 mm; Fatigue load limit Pu:2280 kN; Mass bearing:515 kg; D:1060 mm; H:205 mm; Basic dynamic load rating C:7350 kN; D1:810 mm; Limiting speed:220 r/min; d:800 mm; B:60 mm; r1,2 min.:7.5 mm; Basic static load rating C0:40500 kN; Da max.:845 mm; ra max.:6 mm; da min.:1015 mm; |
3 0217 Rollix Slewing Ring Bearings | B:120 mm; G:M 180x3; Basic static load rating C0:2160 kN; Mass bearing + sleeve:65 kg; G1:24 mm; Calculation factor Y1:2; Reference speed:1400 r/min; B1:146 mm; r1,2 min.:4 mm; D1 ≈:300 mm; Da max.:343 mm; b:16.7 mm; Basic dynamic load rating C:1863 kN; d1:160 mm; Calculation factor Y0:2; da min.:179 mm; Calculation factor Y2:3; d2 ≈:213 mm; B2 ≈:152 mm; ra max.:3 mm; |
61.50.2130.001.49.1504 Standard 5 Slewing Ring Bearings | G:219.151 mm; Mass adapter sleeve assembly:21 kg; B:32.004 mm; Sleeve:S 144x8; Hydraulic nut:HMVC 44E; B4:35.712 mm; d3 max.:279.527 mm; d1:203.2 mm; B1:183.566 mm; Threads per inch:8; d:220 mm; |
162.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | D:100 mm; rs (min):1.1 mm; Grease:1 900 min-1; d:45 mm; H:39 mm; D1:47 mm; static Cor:243.000 kN; Oil:2 500 min-1; Pu:11.050 kN; d1:100 mm; dynamic Cr:141.700 kN; |
162.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings | d:15 mm; D:35 mm; rs (min):0.6 mm; da:19 min; a:23 mm; Bearing designation:3202 ; Da:30 max; Weight:0.07 kg; Grease:13 000 min-1; Oil:16 000 min-1; Dynamic (Cr):10.381 kN; ra:0.6 max; B:15.9 mm; Static (Cor):7.500 kN; Pu:0.341 kN; |
28 0411 01 Rollix Slewing Ring Bearings Video
Rollix 28 0411 01 INTERCHANGE
Large Slewing Bearings Part series 28 0411 01 is a potential replacement for these common bearing part numbers:
28 0411 01
28 0411 01
28 0411 01
28 0411 01
28 0411 01
28 0411 01
28 0411 01
28 0411 01
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Rollix 28 0411 01 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing