Home>Products>Large Slewing Bearings>191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings
191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 191.50.5600.990.41.1502 Bearing SPECIFICATIONS
191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings 205000 N Basic Dynamic Radial Load Rating C Product Brochures , Large Slewing Bearings Manufacturing Service . Get Your 232000 N Basic Static Radial Load Rating Co Free. BEARING-MALAYSIA SDN.BHD.
- Standard 5
191.50.5600.990.41.1502
- 205000 N
- Two Shields & Snap-R
- 232000 N
- 49.00 mm
- 2.50 mm
- 2400 rpm
- 105.000 mm
- 225.0000 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 205000 N
- Two Shields & Snap-R
- 232000 N
- 49.00 mm
- 2.50 mm
- 2400 rpm
- 105.000 mm
- 225.0000 mm
- 2900 rpm
Standard 5 191.50.5600.990.41.1502 191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
2 0422 | Rollix | - | - | 28.575 mm | - | - | - | - | - |
21 0541 01 | Rollix | - | - | - | - | 50 mm | M 52x3 | 35 mm | - |
121.50.6700.990.41.1502 | Standard 5 | - | - | - | - | 260 mm | - | 80 mm | - |
92.50.2644.990.41.1502 | Standard 5 | 200.0000 mm | - | - | - | 95.000 mm | - | 77.80 mm | - |
12.30.1995.001.41.1503 | Standard 5 | 40 mm | - | - | - | 30 mm | - | 30 mm | - |
12.40.2622.401.41.1502 | Standard 5 | 95 mm | - | - | - | 60 mm | - | - | - |
12.30.2330.000.11.1503 | Standard 5 | - | - | - | - | - | - | 29.007 mm | - |
12.35.2690.001.41.1503 | Standard 5 | - | 156 mm | - | - | - | - | - | - |
92.40.2395.991.41.1502 | Standard 5 | 350.0000 mm | - | - | - | 280.000 mm | - | 33.00 mm | - |
12.45.3400.100.19.1502 | Standard 5 | - | - | - | - | 220 mm | 219.151 mm | 32.004 mm | - |
161.45.2366.891.41.1503 | Standard 5 | - | - | - | - | - | - | 49.2 mm | - |
161.36.2000.890.11.1503 | Standard 5 | - | 112 mm | - | - | 19.05 mm | - | 31 mm | - |
191.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
91.40.2395.990.11.1502 | Standard 5 | - | - | - | - | 38.1 mm | - | 49.2 mm | - |
8 0340 04 | Rollix | 55 mm | - | - | - | 45 mm | - | 35 mm | - |
121.45.5300.990.41.1502 | Standard 5 | 8 mm | - | - | - | 3 mm | - | 4 mm | - |
192.50.3550.990.41.1502 | Standard 5 | 720 mm | - | - | - | 440 mm | - | 226 mm | - |
36 0411 01 | Rollix | 150.0000 mm | - | - | - | 70.000 mm | - | 35.00 mm | - |
121.40.4500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
92.40.2199.991.41.1502 | Standard 5 | - | - | 51.594 mm | - | - | - | - | - |
162.36.1900.891.41.1503 | Standard 5 | 280.0000 mm | - | - | - | 180.000 mm | - | 88.00 mm | - |
6 04 | Rollix | 100 mm | - | - | - | 70 mm | - | 30 mm | - |
11.40.2915.001.41.1502 | Standard 5 | 250.0000 mm | - | - | - | 95.000 mm | - | 55.00 mm | - |
162.28.1700.891.21.1503 | Standard 5 | 320 mm | - | - | - | - | - | 108 mm | - |
161.40.2128.890.11.1503 | Standard 5 | 900 mm | - | - | - | 710 mm | - | 410 mm | - |
12.50.3739.001.49.1502 | Standard 5 | - | 156 mm | - | - | 36.512 mm | - | - | - |
192.50.6735.990.41.1502 | Standard 5 | 72 mm | - | - | - | 35 mm | - | 17 mm | - |
11.40.2795.000.11.1502 Standard 5 Slewing Ring Bearings | Basic static load rating C0:11.4 kN; Calculation factor X:0.41; Limiting speed:26000 r/min; Calculation factor Y1:0.92; Calculation factor e:0.68; Calculation factor A:0.000656; a:16 mm; D1 ≈:41.66 mm; Calculation factor kr:0.095; ra max.:1 mm; Mass bearing:0.13 kg; r1,2 min.:1 mm; d1 ≈:35.8 mm; Da max.:46.4 mm; da min.:30.6 mm; Calculation factor Y0:0.76; d2 ≈:30.773 mm; B:15 mm; |
121.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Preload class B GB:120 N; Basic static load rating C0:5 kN; Db max.:45 mm; B:12 mm; Da max.:43.8 mm; r3,4 min.:0.3 mm; Preload class D GD:480 N; Preload class C GC:240 N; Static axial stiffness, preload class D:159 N/µm; ra max.:0.6 mm; a:14.5 mm; Static axial stiffness, preload class A:71 N/µm; D1:39.9 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class B:92 N/µm; |
162.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | A2:242.887 mm; J max.:549.275 mm; Eye bolt:2 x 3/8-16 UNC; Mass pillow block:125 kg; H2:69.85 mm; PG:1/4 NPT; ba:74.612 mm; P60°:234 kN; A1:171.45 mm; Cap bolt:4 x 3/4-10 UNC; R2:37.306 mm; H:360.363 mm; P150°:77 kN; H1:179.375 mm; Stabilizing ring:SR-34-0; End plug (suffix Y):EPR 18; Cap bolt recommended tightening torque:203.4 N·m; Da:309.999 mm; RG:3/4 NPT; P180°:92.5 kN; |
6 04 Rollix Slewing Ring Bearings | Fatigue load limit Pu:22.4 kN; ra max.:1 mm; Calculation factor kr:0.25; Reference speed:3000 r/min; D1 ≈:87 mm; r1,2 min.:1 mm; K:3.5 mm; B:30 mm; Mass bearing:0.78 kg; da min.:75.2 mm; Basic static load rating C0:193 kN; Basic dynamic load rating C:114 kN; b1:4.5 mm; das:79 mm; d1 ≈:83 mm; D:100 mm; Da max.:95 mm; Limiting speed:3800 r/min; d:70 mm; |
11.40.2619.001.41.1502 Standard 5 Slewing Ring Bearings | Static (Cor):27.300 kN; rs Dynamic (Cr):1.5 mm; with cylindrical bore:7 500 min-1; Oil:6 300 min-1; d:55 mm; D:100 mm; with tapered bore:2211 ; Grease:0.450 kN; B1:mm; Pu:10.000 kN; B:25 mm; |
92.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:2350 r/min; Cap bolt:2 x 5/8-11 UNC; J max.:295.275 mm; da:61.913 mm; PG:1/8 NPT; Cap bolt recommended tightening torque:298.3 N·m; A2:149.225 mm; L:349.25 mm; Stabilizing ring:2 x SR-1615; RG:3/8 NPT; PosiTrac Plus contact element:2 x B10724-37; H1:101.6 mm; P180°:49.8 kN; J min.:263.525 mm; Housing:SAF 615; N1:22.225 mm; h:42.862 mm; End plug (suffix Y):EPR 7; |
121.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Mass bearing:0.35 kg; Reference speed:8000 r/min; da max.:43 mm; Calculation factor Y:1.6; T:19.845 mm; Dimension series:14000; ra max.:0.8 mm; D:69.012 mm; Da max.:62 mm; r3,4 min.:1.3 mm; Calculation factor Y0:0.9; d:33.338 mm; r1,2 min.:0.8 mm; B:19.583 mm; Basic static load rating C0:67 kN; Db min.:63 mm; Limiting speed:10000 r/min; C:15.875 mm; rb max.:1.3 mm; Da min.:57 mm; |
191.32.2500.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:43000 N; d:40.000 mm; B:39.70 mm; Grease Speed Rating n1:5000 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:60500 N; Oil Speed Rating n2:6700 rpm; Accessories:Two Shields; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5000 rpm; |
191.32.3150.990.41.1502 Standard 5 Slewing Ring Bearings | d:38.1 mm; Material constant KM:330; Da min.:60.7 mm; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:0.79 kg; D:71.438 mm; dk:63.881 mm; C:33.325 mm; da max.:49.7 mm; M:4 mm; Design (sliding contact surface combination):Steel/steel; b:4.8 mm; b1:5 mm; Specific static load factor K0:300 N/mm²; Sealing solution:-; ra max.:1 mm; B:40.132 mm; r2 min.:1 mm; Da max.:67.4 mm; da min.:42.8 mm; |
6 0508 Rollix Slewing Ring Bearings | Dimension series:3FC; B:50 mm; T:53 mm; Calculation factor Y0:0.8; Limiting speed:3400 r/min; C:43 mm; ra max.:3 mm; Cb min.:10 mm; rb max.:2.5 mm; Db min.:180 mm; Mass bearing:6.02 kg; r3,4 min.:2.5 mm; Basic static load rating C0:510 kN; Calculation factor e:0.43; Basic dynamic load rating C:443 kN; Da min.:161 mm; r1,2 min.:3 mm; d1 ≈:143.2 mm; Reference speed:2800 r/min; db min.:119 mm; |
191.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Fw:10 mm; Basic static load rating C0:5.7 kN; Reference speed:28000 r/min; Basic dynamic load rating C:4.57 kN; Fatigue load limit Pu:0.63 kN; Mass needle roller and cage assembly:0.0016 kg; Limiting speed:32000 r/min; Ew:13 mm; U:10 mm; |
192.40.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Category:Mounted Cartridge Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:23.608; Product Group:M06288; Mounting Method:Tapered Adapter Sleeve; Housing Style:Cartridge Unit; Housing Material:Cast Steel; Rolling Element:Spherical Roller Bearing; Expansion / Non-expansion:Non-expansion; Relubricatable:Yes; Insert Part Number:22226; Seals:Triple Lip Contact; Other Features:Double Row | Extreme Duty | Urethane Seal; |
191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 191.50.5600.990.41.1502 INTERCHANGE
Large Slewing Bearings Part series 191.50.5600.990.41.1502 is a potential replacement for these common bearing part numbers:
191.50.5600.990.41.1502
191.50.5600.990.41.1502
191.50.5600.990.41.1502
191.50.5600.990.41.1502
191.50.5600.990.41.1502
191.50.5600.990.41.1502
191.50.5600.990.41.1502
191.50.5600.990.41.1502
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 191.50.5600.990.41.1502 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing