Home>Products>Large Slewing Bearings>162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings
162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 162.45.2510.890.11.1503 Bearing SPECIFICATIONS
With 26 mm A5 over 10170 full-service stores, our 162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings inventory is extensive and our parts are 10 mm Recommended diameter for attachment bolts, mm G priced right. within 24 hours. This BEARING-MALAYSIA SDN.BHD. helps you 4 N·m Recommended tightening torque for grub screw maximize your productivity by saving time and your hard-earned dollars.
- Standard 5
162.45.2510.890.11.1503
- 10 mm
- 4 N·m
- 26 mm
- 0.3 kg
- 0.375 in
- 86 mm
- 30 mm
- 18.3 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 10 mm
- 4 N·m
- 26 mm
- 0.3 kg
- 0.375 in
- 86 mm
- 30 mm
- 18.3 mm
- 15 mm
- 12.3 mm
- 5000 r/min
- 0.28 kN
- 31 mm
- 59 mm
- 3.175 mm
- 63.5 mm
- 37.3 mm
- Composite for food a
- 19.05 mm
- 10.8 kN
Standard 5 162.45.2510.890.11.1503 162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
3 0525 01 | Rollix | 460 mm | - | - | - | 300 mm | - | - | - |
191.40.3150.990.41.1502 | Standard 5 | 34 mm | 20 mm | - | - | 10 mm | - | - | - |
62.50.2800.001.49.1504 | Standard 5 | 120 mm | - | - | - | - | - | 29 mm | - |
192.25.2000.990.41.1502 | Standard 5 | 150.0000 mm | - | - | - | 70.000 mm | - | 35.00 mm | - |
25 0411 01 | Rollix | - | 160.338 mm | - | - | - | - | 65.484 mm | - |
11.40.2619.000.11.1502 | Standard 5 | 37.0000 mm | - | - | - | 20.000 mm | - | 18.00 mm | - |
91.35.1900.991.41.1502 | Standard 5 | - | 192.484 mm | 38.1 mm | - | - | - | - | - |
92.50.2842.990.41.1502 | Standard 5 | - | 157.559 mm | - | - | - | - | - | - |
12.30.2330.001.41.1503 | Standard 5 | 52.0000 mm | - | - | - | 20.000 mm | - | 15.00 mm | - |
12.35.2500.000.11.1503 | Standard 5 | 260.0000 mm | - | - | - | 170.000 mm | - | 42.00 mm | - |
2 0308 01 | Rollix | - | - | - | - | 45 mm | - | - | - |
2 0422 | Rollix | - | - | 28.575 mm | - | - | - | - | - |
8 0270 04 | Rollix | - | - | - | - | - | - | - | - |
12.35.1960.400.11.1503 | Standard 5 | - | - | - | - | 40 mm | - | - | - |
162.45.2240.891.41.1503 | Standard 5 | 90 mm | - | - | 23 mm | 50 mm | - | 28 mm | - |
12.30.1995.001.41.1503 | Standard 5 | 40 mm | - | - | - | 30 mm | - | 30 mm | - |
161.36.1900.891.41.1503 | Standard 5 | - | 138 mm | - | - | - | - | - | - |
192.25.2500.990.41.1502 | Standard 5 | 460 mm | 30 mm | - | - | 420 mm | - | - | - |
92.35.1900.990.11.1502 | Standard 5 | 270.0000 mm | - | - | - | 150.000 mm | - | 90.00 mm | - |
191.25.2500.990.41.1502 | Standard 5 | 222.25 mm | - | - | 104.775 mm | 152.4 mm | - | 120.65 mm | - |
191.40.2800.990.41.1502 | Standard 5 | 16 mm | - | - | - | 8 mm | - | 4 mm | - |
191.25.1800.990.41.1502 | Standard 5 | - | - | - | 71.425 mm | - | - | 83.337 mm | - |
191.40.3550.990.41.1502 | Standard 5 | - | - | 225 mm | - | 60 mm | M 60x4 | 44 mm | - |
161.36.1800.890.11.1503 | Standard 5 | - | - | - | - | - | - | 52 mm | - |
12.40.2622.401.41.1502 | Standard 5 | 95 mm | - | - | - | 60 mm | - | - | - |
92.50.2266.990.41.1502 | Standard 5 | - | - | - | - | - | - | 65 mm | - |
8 04 Rollix Slewing Ring Bearings | L:539.75 mm; J1:95.25 mm; Labyrinth ring:2 x LOR 114; P60°:230 kN; P180°:96.1 kN; Da:259.999 mm; R2:39.688 mm; Pa:30.9 kN; h:60.325 mm; J max.:463.55 mm; Stabilizing ring:SR-0-24; H1:160.325 mm; R1:95.25 mm; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; Housing:SAF 624; P120°:87.2 kN; A2:215.9 mm; A1:158.75 mm; Cap bolt recommended tightening torque:203.4 N·m; |
92.50.2446.990.41.1502 Standard 5 Slewing Ring Bearings | Mass bearing:215 kg; Calculation factor e:0.3; Calculation factor Y1:2.3; d:360 mm; Calculation factor Y2:3.4; Basic static load rating C0:6950 kN; K:12 mm; b:22.3 mm; d2 ≈:436 mm; Limiting speed:1000 r/min; B:192 mm; Calculation factor Y0:2.2; Da max.:580 mm; ra max.:4 mm; Basic dynamic load rating C:4515 kN; Reference speed:750 r/min; D1 ≈:524 mm; da min.:371 mm; D:600 mm; r1,2 min.:5 mm; |
61.50.2645.001.49.1504 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:3800 rpm; B:49.20 mm; Basic Static Radial Load Rating Co:81500 N; d:55.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; Basic Dynamic Radial Load Rating C:106000 N; D:120.0000 mm; Oil Speed Rating n2:5000 rpm; Accessories:Shield & Seal & Snap; |
91.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | H2:41.275 mm; Cap bolt:2 x 5/8-11 UNC; Bearing limiting speed:5300 r/min; h:38.1 mm; H1:101.6 mm; P180°:49.8 kN; P120°:45.4 kN; RG:3/8 NPT; P90°:72.5 kN; H:192.484 mm; Housing:SAF 518; Pa:10.9 kN; A2:149.225 mm; P150°:40.5 kN; L:349.25 mm; R2:27.781 mm; Initial grease fill:141.75 g; J max.:298.45 mm; N1:22.225 mm; Cap bolt, SAE grade:5; |
21 0411 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:118000 N; B:45.00 mm; Fillet Radius ra:2.50 mm; D:200.0000 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; d:95.000 mm; Basic Dynamic Radial Load Rating C:153000 N; Oil Speed Rating n2:3800 rpm; Accessories:Two Seals; Sealed Speed Rating n3:2200 rpm; Grease Speed Rating n1:3200 rpm; |
161.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | R1:79.375 mm; L:466.725 mm; H:292.1 mm; End plug (suffix Y):EPR 15; da:109.537 mm; R2:36.513 mm; Da:230 mm; Eye bolt:2 x 3/8-16 UNC; Pa:24.9 kN; A2:279.4 mm; P150°:118 kN; Max. speed for Taconite seal:700 r/min; Ca:73.812 mm; S:4.763 mm; RG:1/2 NPT; PG:1/4 NPT; P90°:185 kN; Initial grease fill:382.73 g; P60°:308 kN; P120°:125 kN; |
161.40.2000.890.11.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:5600 rpm; D:80.0000 mm; Accessories:One Seal; Oil Speed Rating n2:7500 rpm; B:38.10 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm; d:35.000 mm; Basic Static Radial Load Rating Co:48000 N; Basic Dynamic Radial Load Rating C:52300 N; |
161.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | Fillet Radius ra:0.64 mm; Grease Speed Rating n1:17000 rpm; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:9560 N; Basic Static Radial Load Rating Co:4750 N; Oil Speed Rating n2:20000 rpm; B:12.00 mm; Sealed Speed Rating n3:12000 rpm; D:40.0000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Oil Speed Rating Open/Shielded n2:20000 rpm; d:17.000 mm; |
121.36.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:19000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:4150 N; Sealed Speed Rating n3:14000 rpm; B:12.00 mm; Grease Speed Rating Open/Shielded n1:19000 rpm; Oil Speed Rating n2:24000 rpm; d:12.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Oil Speed Rating Open/Shielded n2:24000 rpm; Accessories:Snap-Ring; |
191.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | Cap bolt recommended tightening torque:81.3 N·m; P90°:32.5 kN; H2:28.575 mm; Mass pillow block:12.7 kg; Appropriate attachment bolt size G:0.5 in; Cap bolt, SAE grade:5; J max.:244.475 mm; Ca:37.008 mm; Housing:FSAF 515; Bearing limiting speed:6700 r/min; P180°:22.2 kN; Initial grease fill:136.08 g; ba:30.163 mm; PG:1/8 NPT; End plug (suffix Y):EPR 7; A2:118.666 mm; RG:1/4 NPT; N1:15.875 mm; |
121.40.5300.990.41.1502 Standard 5 Slewing Ring Bearings | d:65.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4800 rpm; Oil Speed Rating n2:5600 rpm; D:140.0000 mm; Fillet Radius rb:1.00 mm; B:33.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Basic Static Radial Load Rating Co:93000 N; |
92.40.2003.991.41.1502 Standard 5 Slewing Ring Bearings | Stabilizing ring:SR-24-20; P90°:149 kN; H2:53.975 mm; Mass pillow block:64 kg; H1:133.35 mm; Taconite seal:TER 111; End plug (suffix Y):EPR 14; P150°:87.2 kN; Cap bolt, SAE grade:8; L:419.1 mm; R1:79.375 mm; P120°:94.3 kN; Cap bolt:5/8-11 UNC; R2:30.163 mm; h:46.831 mm; A1:120.65 mm; Da:215.001 mm; A2:250.825 mm; RG:1/2 NPT; ba:53.181 mm; |
162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 162.45.2510.890.11.1503 INTERCHANGE
Large Slewing Bearings Part series 162.45.2510.890.11.1503 is a potential replacement for these common bearing part numbers:
162.45.2510.890.11.1503
162.45.2510.890.11.1503
162.45.2510.890.11.1503
162.45.2510.890.11.1503
162.45.2510.890.11.1503
162.45.2510.890.11.1503
162.45.2510.890.11.1503
162.45.2510.890.11.1503
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 162.45.2510.890.11.1503 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing