Home>Products>Large Slewing Bearings>11.40.2795.001.41.1502 Standard 5 Slewing Ring Bearings
11.40.2795.001.41.1502 Standard 5 Slewing Ring Bearings
Large Slewing Bearings
Standard 5 11.40.2795.001.41.1502 Bearing SPECIFICATIONS
Large Slewing Bearings are a 32 mm A few brands you will find in our inventory. Find 11.40.2795.001.41.1502 Standard 5 Slewing Ring Bearings to see what's in BEARING-MALAYSIA SDN.BHD. 31.8 mm J1 stock!
- Standard 5
11.40.2795.001.41.1502
- 31.8 mm
- 11.2 kN
- 32 mm
- 52.4 mm
- 47.6 mm
- 41.5 mm
- 1/4-28 UNF
- 76 mm
- BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Large Slewing Bearings Cross References
- 31.8 mm
- 11.2 kN
- 32 mm
- 52.4 mm
- 47.6 mm
- 41.5 mm
- 1/4-28 UNF
- 76 mm
- 138 mm
- 0.375 in
- YAR 206-104-2RF/VE49
- 26.9 mm
- 22.2 mm
- 10 mm
- 3800 r/min
- Composite for food a
- 0.475 kN
- 13.3 mm
- 10.7 mm
- 83 mm
Standard 5 11.40.2795.001.41.1502 11.40.2795.001.41.1502 Standard 5 Slewing Ring Bearings Sponsored Products Related To This Item
No. | Brand | D | H | h | C | d | G | B | E |
121.45.5600.990.41.1502 | Standard 5 | 1060 mm | 205 mm | - | - | 800 mm | - | 60 mm | - |
11.50.2987.001.49.1502 | Standard 5 | - | 216 mm | - | - | - | - | 86 mm | - |
8 0405 05 | Rollix | 42 mm | - | - | - | 20 mm | - | 12 mm | - |
162.45.2654.891.41.1503 | Standard 5 | 40 mm | - | - | - | 17 mm | - | 12 mm | - |
192.50.3550.990.41.1502 | Standard 5 | 720 mm | - | - | - | 440 mm | - | 226 mm | - |
192.32.2800.990.41.1502 | Standard 5 | - | 156 mm | - | - | 31.75 mm | - | - | - |
91.50.2266.990.41.1502 | Standard 5 | 280.0000 mm | - | - | - | 180.000 mm | - | 46.00 mm | - |
1 0235 | Rollix | 240 mm | - | - | - | 110 mm | - | - | - |
92.35.1802.991.41.1502 | Standard 5 | 50 mm | - | 41 mm | - | 40 mm | - | 25 mm | - |
11.40.2915.000.11.1502 | Standard 5 | - | - | 40.481 mm | - | - | - | - | - |
1 0181 02 | Rollix | 150 mm | - | - | 37 mm | - | - | 49 mm | - |
6 0307 | Rollix | - | 100.013 mm | - | - | - | - | 69.85 mm | - |
11.30.2031.600.11.1503 | Standard 5 | 22.0000 mm | - | - | - | 8.000 mm | - | 7.00 mm | - |
162.36.2000.890.11.1503 | Standard 5 | 540 mm | - | - | - | 440 mm | - | 60 mm | 516 mm |
121.36.4000.990.41.1502 | Standard 5 | 37.0000 mm | - | - | - | 12.000 mm | - | 12.00 mm | - |
31 0411 01 | Rollix | 40.0000 mm | - | - | - | 17.000 mm | - | 17.5 mm | - |
26 0541 01 | Rollix | - | 1.5 mm | - | - | - | - | 100 mm | - |
161.50.2800.891.41.1503 | Standard 5 | - | 317.5 mm | - | - | - | - | - | - |
62.50.2490.001.49.1504 | Standard 5 | 6.04 Inch | 153.416 Millimeter | - | - | - | 5.118 Inch | 130 Millimeter | - | - | - |
3 026 | Rollix | 210 mm | - | - | - | 190 mm | - | 180 mm | - |
12.30.2538.001.41.1503 | Standard 5 | - | - | 40.481 mm | - | - | - | - | - |
161.36.1900.891.41.1503 | Standard 5 | - | 138 mm | - | - | - | - | - | - |
192.20.2000.990.41.1502 | Standard 5 | 125.0000 mm | - | - | - | 70.000 mm | - | 39.69 mm | - |
11.40.2795.000.11.1502 | Standard 5 | - | - | - | - | 25 mm | - | 15 mm | - |
11.30.2235.000.11.1503 | Standard 5 | 215.0000 mm | - | - | - | 100.000 mm | - | 47.00 mm | - |
11.25.1800.001.41.1503 | Standard 5 | 560 mm | - | 25.4 mm | - | 305.033 mm | - | 200 mm | - |
12.35.2500.000.11.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:1500 rpm; Accessories:Two Seals; d:170.000 mm; B:42.00 mm; D:260.0000 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Grease Speed Rating Open/Shielded n1:2200 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:168000 N; Basic Static Radial Load Rating Co:173000 N; |
91.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | Pu:1690 kN; Static (Cor):16.7 mm; with cylindrical bore:710 min-1; d:240 mm; B:128 mm; rs (min):4 mm; Dynamic (Cr):9 mm; Grease:2860 kN; with tapered bore:840 min-1; Oil:246.040 kN; D:400 mm; |
11.35.2620.001.41.1503 Standard 5 Slewing Ring Bearings | H1:47.6 mm; s1:25.4 mm; Thread size attachement end G:M10; Mass bearing unit:0.78 kg; L:110 mm; A5:28.8 mm; d:31.75 mm; Basic dynamic load rating C:21.6 kN; Thread length G1:12 mm; B:42.9 mm; H:95 mm; A1:32.5 mm; Thread grub screw G2:5/16-24 UNF; J:82.6 mm; Basic static load rating C0:15.3 kN; Limiting speed:3200 r/min; Recommended tightening torque for grub screw:6.5 N·m; A:48 mm; Fatigue load limit Pu:0.655 kN; |
91.30.1799.990.11.1502 Standard 5 Slewing Ring Bearings | Initial grease fill:2154.6 g; h:56.356 mm; P90°:334 kN; Mass pillow block:251 kg; H2:85.725 mm; PG:1/4 NPT; R1:122.237 mm; Stabilizing ring:2 x A8897; Max. speed for PosiTrac Plus seal:640 r/min; PosiTrac Plus contact element:2 x B10724-552; Cap bolt recommended tightening torque:2467.6 N·m; L:749.3 mm; End plug (suffix Y):X-5217-4; RG:1 NPT; da:214.313 mm; P150°:185 kN; R2:42.862 mm; |
162.40.2000.891.41.1503 Standard 5 Slewing Ring Bearings | Taconite seal:2 x TK 72; P0°:6000 kN; A1:360 mm; End cover:ETS 72; da:340 mm; Q180°:2100 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H:695 mm; Cap bolt, size:M 36x240; H2:120 mm; H1:350 mm; Appropriate attachment bolt, size G:36 mm; N4 max.:30 mm; N1:42 mm; J:840 mm; P90°:3600 kN; Q150°:2400 kN; ba min.:176 mm; ATS:410 mm; A:400 mm; |
11.25.1800.001.41.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:1677 kN; b:50.8 mm; Calculation factor Y2:1.15; Calculation factor e:0.88; B:200 mm; d:305.033 mm; Calculation factor Y0:0.8; r1,2 min.:3.3 mm; D:560 mm; D1 ≈:450 mm; Fatigue load limit Pu:430 kN; Mass bearing:205 kg; h:25.4 mm; Comparative radial load rating CF:765 kN; Calculation factor Y1:0.77; Comparative axial load rating CFa:657 kN; T:199.263 mm; r3,4 min.:6.4 mm; |
91.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | d:7 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0036 kg; B:12 mm; F:10 mm; |
32 0541 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:86500 N; Fillet Radius ra:2.00 mm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; B:39.00 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:124000 N; d:80.000 mm; Grease Speed Rating n1:3800 rpm; D:170.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; |
191.25.1800.990.41.1502 Standard 5 Slewing Ring Bearings | ra max.:0.6 mm; rb max.:1 mm; Da max.:143.1 mm; Da min.:131.4 mm; C:71.425 mm; r1 min.:0.6 mm; B:83.337 mm; b:10.5 mm; da min.:101.2 mm; Mass plain bearing:5.8 kg; r2 min.:1 mm; Sealing solution:Triple-lip seals; da max.:108.6 mm; Basic dynamic load rating C:780 kN; M:6.5 mm; α:6 °; dk:136.906 mm; Specific static load factor K0:300 N/mm²; Design (sliding contact surface combination):Steel/steel, heavy-d; |
6 0508 Rollix Slewing Ring Bearings | Dimension series:3FC; B:50 mm; T:53 mm; Calculation factor Y0:0.8; Limiting speed:3400 r/min; C:43 mm; ra max.:3 mm; Cb min.:10 mm; rb max.:2.5 mm; Db min.:180 mm; Mass bearing:6.02 kg; r3,4 min.:2.5 mm; Basic static load rating C0:510 kN; Calculation factor e:0.43; Basic dynamic load rating C:443 kN; Da min.:161 mm; r1,2 min.:3 mm; d1 ≈:143.2 mm; Reference speed:2800 r/min; db min.:119 mm; |
192.32.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.5 in; d:31.75 mm; B4:6.75 mm; A3:3.2 mm; Mass bearing unit:1.35 kg; s1:32.3 mm; Basic static load rating C0:15.3 kN; J7:15 mm; R1:22 mm; Basic dynamic load rating C:25.5 kN; B1:51.1 mm; Thread grub screw G2:3/8-24 UNF; Db1:88 mm; H:156 mm; Hexagonal key size for grub screw N:4.763 mm; J:130 mm; Rα:45 °; Da:88.9 mm; |
91.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | P150°:236 kN; Eye bolt:2 x 1/2-13 UNC; End plug (suffix Y):X-5217-2; L:831.85 mm; Initial grease fill:2749.95 g; Mass pillow block:351 kg; Cap bolt recommended tightening torque:4284.4 N·m; P120°:260 kN; H1:241.3 mm; PG:1/4 NPT; P180°:285 kN; Da:399.999 mm; Housing:SSAFS 052 KA; H2:95.25 mm; PosiTrac Plus contact element:2 x B10724-178; Stabilizing ring:2 x A8898; h:69.85 mm; Cap bolt:1 1/2-6 UNC; |
11.40.2795.001.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 11.40.2795.001.41.1502 INTERCHANGE
Large Slewing Bearings Part series 11.40.2795.001.41.1502 is a potential replacement for these common bearing part numbers:
11.40.2795.001.41.1502
11.40.2795.001.41.1502
11.40.2795.001.41.1502
11.40.2795.001.41.1502
11.40.2795.001.41.1502
11.40.2795.001.41.1502
11.40.2795.001.41.1502
11.40.2795.001.41.1502
Contact Us
- BEARING-MALAYSIA SDN.BHD.
- AddressNo.3, Jalan Arkitek U 1/12, Section U1, Hicom Glenmarie Industrial Park, 56098 Shah Alam, Selangor D
- Phone(Working Time)345-298-7805
- Fax
Standard 5 11.40.2795.001.41.1502 Technical Articles
Do new wheel hubs come with bearings? |
Do you grease double shielded bearings? |
How do you find true bearing? |
Large Slewing Bearings CATEGORIES
- Vickers Vane Pump
- Vickers Piston Pump
- Hengyuan H Series
- AMI Bearing
- AURORA Bearing
- DODGE Bearing
- EBC Bearing
- FAG Bearing
- IKO Bearing
- IPTCI Bearing
- ISOSTATIC Bearing
- MCGILL Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- TIMKEN Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Throttle valves
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- Ge80es Bearing
- SKF 2205 Bearing
- Cmac 5095 Bearing
- SKF 22208 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing